Survival nesting, construction of nest in Tabriz
Sole refers to metal structures with a sloping roof that are designed and produced in different types and shapes based on technical calculations. These inclined structures have different dimensions according to the type of application. Sheds are used to cover large openings and in industrial and agricultural buildings such as factories, warehouses, airplane hangars, repair shops, sports halls, parking lots, poultry farms, livestock farms, stores and other cases. . The important thing about these structures is the affordable and appropriate price of the shed, which should be very careful about the type of use and dimensions. Parts with variable dimensions are often used for the construction of industrial sheds and industrial halls. The weight and dimensions of these parts change according to the type of use of each industrial unit. The most important factors affecting the final weight and tonnage of industrial sheds are the location. The desired place for their construction is in terms of wind speed, the maximum amount of snow, the height of the columns, the opening of the hall and, if necessary, the construction of a roof crane.
The components used in the skeleton of the metal nest
- ستون: ستون ها یکی از مهمترین اجزای سولهها هستندکه غالبا از تیر ورق ساخته می شوند. وظیفه ستون ها تحمل بار وزن سوله و مقاومت در برابر شرایط بحرانی ماند زلزله باشد. ستون های فرعی نگهدارنده دیوار هستند که در ابتدا و انتهای سازه نصب می شوند و نیروی باد را منتقل و مهار می کند. کند. می شود را به پولین ها منتقل می کنند. بادبند بدنه که نیروی باد را به پی منتقل می کند و بادبند سقف که نیروی باد راد از طریق قاب منتقل می کند. (میله مهار): این میل social رفترها بار وارده به سولهها را به ستون‌ها منتقل می کند. دارند.
Style nest
Light sheds are often used in industrial structures, which are usually two-dimensional and three-dimensional truss type. Light-weight holsters are more versatile than heavy-duty holsters and can usually be used anywhere. This type of structure is usually used in cold stores and industrial cattle farms. Light sheds are also called truss style sheds. Since these structures are designed with new engineering methods, they are made of square profile (ST37) and have high endurance. In this structure, the consumption of steel metal is reduced and for this reason it has a lower price.
Heavy nest
Heavy sheds are divided into two categories: concrete and metal, and the execution time of a metal shed is faster than that of a concrete one. Because in the concrete type, it takes about a few days to prepare the concrete. But in its metal type, after the foundation of the structure is prepared, the columns and roof rafters, etc., can be mounted on the foundation. But in terms of price, the metal shed is more expensive because it is made of steel, which is more expensive than concrete in the current market of Iran. For this reason, most people go for a concrete shed, which uses sheet beam pieces for high resistance to increase endurance.
The differences of lightweight and heavy
Sole light is made of pipe profiles and for this reason their weight is less than other methods. It is not low against heavy shed resistance. Of course, light sheds are built with truss methods. But the disadvantages of light sheds are more related to the price of their construction in specific and limited dimensions. In addition, sometimes the use of light and resistant materials can cause financial losses for the employer.