Angles are steel sections whose cross-section consists of two perpendicular sides. These irons are produced by hot and cold rolling methods. It is better to know that its task is not only to connect different parts of the structure to each other, but their main role is to make the load distribution uniform in order to prevent the destruction of the structure. You should pay attention to the fact that since structures are built in various environments, you should use a specific type or material in each environment according to weather conditions and other factors. Another important point when buying is their angle because it can affect the weight of the structure.
Corner applications
If you are one of those people who deal with these irons, you should know that it is usually used in making all kinds of frames, bases, column bases for creating fences, making stairs, making masts and trusses, making lids and so on. This product is used for light roofs, the construction of gables, the construction of high beads and most importantly for the construction of back straps and side restraints between columns. Of course, it is better to know that its metal type is widely used in structures. In addition, the metal type of this product is used as a back strap or stiffener to connect the beam and column.
In some cases, it is also used as a restraining force from the beam to the column. Sometimes steel structures are used as beams to support distributed loads. Among its other uses, the following can be mentioned:
- از این محصولات در اندازهی ۵۰ تا ۱۵۰ میلی متری جهت اتصالات گوناگون استفاده میکنند.
- استفاده از نوع لقمهای این محصول در سازههای مربوط به آسانسور
- به کارگیری تیرچه نبشی در سقفهای کرومیت
- به کارگیری در باد بندها و سازههای LSF
- اتصالات ساده در سازه
- ساخت ستون و خرپا
- ماشین آلات صنعتی
- مهار دیوارهای سفالی
- دکلهای انتقال نیرو
Types of corners
Corners are divided into two types according to the type of production:
- نبشی پرسی
- نبشی فابریک
Corners are divided into two types in terms of appearance:
- نبشی بال مساوی
- نبشی بال نامساوی
Corner Press:
This type of corner is made from a sheet with a length of 6 meters, which is bent from the middle of the width of the sheet, and they give it a shape. This means that the basic nature of this type of corner is steel sheet.
Fabric Corner:
This type of corner comes out of the production line in the form of a corner from the very beginning of the production process. And they share an unequal wing angle, which can tell the difference between them from their appearance.
Winged Corner:
The angle is shown in the construction drawings with the English letter L (L) and if the wing is equal, then the size of the wing is inserted after the letter L, for example, L200, which means that the wing angles are shown equal to the wing size of 200 mm. .
Spiral Corner:
A type of corner with a light equal wing that is produced from 20x20x2 to 50x50x5. In the market, spiral corners are known as equal-wing hot rolled saws.
Endowed wing corner:
Meanwhile, unequal angles are among the sections that are used in special and special industries where, for any reason, it is not possible to use common or so-called equal angles (L) and the only solution is to use It is one of the unequal corners. Uneven corners are available in different sizes and thicknesses, please contact us to know the list of available sizes. All kinds of steel corners, iron corners and uneven corners in all standard and widely used dimensions. An uneven corner with different materials, including; ST52, ST37 and ST44 are produced and supplied. If the wings are unequal, the size of both wings is added together in the size map, such as L200*100, which means the angle of the unequal wing, one wing of which is 200 mm and the other wing is 100 mm.
