The washing machine does not turn on
One of the problems that can happen to all types of washing machines and from any brand is the washing machine not turning on. Washing machine is a complex machine, which consists of many parts. Damage to some parts of the washing machine may cause the machine to not turn on. But the most important reasons for the washing machine not turning on are:
and washing machine buttons
▪️Disturbance in the operation of the washing machine electronic board
▪️burning or failure of the washing machine engine
The door of the washing machine does not open after washing
The operation of the washing machine is such that after the door is locked, the washing machine is activated and performs the washing operation, the lock or switch of the washing machine is opened after the washing operation is completed. Unfortunately, one of the common failures of the washing machine that may happen at this time is the washing machine door not opening. There are many reasons for the washing machine door not opening, some of which are:
▪️ washing machine door hinge damage
▪️ malfunctioning of the washing machine door microswitch
▪️ large volume of water accumulation In the washing machine due to the water not draining
Excessive vibration of the washing machine
Excessive vibration and movement of the washing machine while working is one of the common failures of the washing machine; which should be diagnosed and repaired as soon as possible.
The vibration of the washing machine is often accompanied by a lot of noise, often improper use and some technical problems such as damaged parts cause this failure in the washing machine. The most important reasons for the vibration and movement of the washing machine are:
▪️ the machine is not level
▪️ not paying attention to the weight of the clothes thrown in the washing machine and the boiler becoming heavy
▪️ Damage to the washing machine spring
▪️ Damage to the electronic board
▪️ Water not draining and...
Not drying the clothes in the washing machine
Drying of clothes in the washing machine is one of the common failures of the washing machine, which may be due to several reasons such as:
▪️damage of the inlet filter,
▪️damage of the electric valve and...
If it happens, troubleshooting the washing machine is the first thing that should be done to solve the problem of the clothes not being drained. Do the washing machine. Damage to any of the mentioned parts may cause clothes to not be properly drained. For example, you can first troubleshoot the solenoid valve in the washing machine, first connect the solenoid valve to the electricity.
Not draining the water in the washing machine
One of the common failures of the washing machine is that the water does not drain in the washing machine. Unfortunately, there are many reasons that cause the water in the washing machine to not drain. Some of these reasons are:
▪️disruption in the function of the drain pump
▪️damage of the drain hose and its blockage
▪️obstacle between the outlets
▪️damage of the electronic board of the car Washing machine
Most of the time, the water not draining in the washing machine can be repaired by servicing the machine, in many cases, the pipes, outlets, and filter are not used, causing the water to not drain properly.
Washing machine pot not spinning
Another issue that is known as one of the common washing machine failures is the washing machine boiler not turning. The important reasons that cause the washing machine boiler to not rotate are:
▪️blocking of the washing machine filter and pump hose
▪️breakage of the washing machine door lock and failure to close its door
▪️breakage of the board washing machine electronics
▪️ washing machine motor coupling failure
▪️ washing machine belt damage
to solve the problem of the washing machine not spinning, you must first Check the washing machine door switch. Damage to this part in the washing machine prevents the machine from turning or turning on. The door switch should be checked by experts, if the reason for the washing machine not spinning is because the door lock is damaged, the technician will replace or repair the part to solve this problem. Troubleshooting and repairs should be done by the experienced and expert staff of your washing machine brand representative, such as AEG washing machine representative or Electrolux washing machine representative in Parsa Service.