Types of Plumbing Methods
Plumbing of the building can be done in different ways, and in this section we will discuss the most common ones:
Plumbing
Surface piping is one of the old methods of piping that has been widely used in the past. In this plumbing method, according to the surface of the pipes, the plumbing equipment and its route can be seen on the wall or floor of the building. In exposed piping, after determining the location of the installation, the pipes are installed in the desired location. This plumbing method is usually used for toilet and bathroom pipes. Azin and Yazd Bespar are two reliable companies producing single-layer pipes and fittings, whose products can be used for facing piping.
- The benefits of plumbing by the method
Plumbing the building in this way has many advantages, some of which include the following:
- امکان گرفتن انشعاب آسان از لوله های روکار در کوتاه ترین زمان ممکن.
- امکان تشخیص پوسیدگی و آسیب دیدگی لوله ها و تعمیر آسان آنها در کم ترین زمان ممکن بدون صرف های هزینه فراوان.
- فاصله داشتن لوله ها و عدم تماس آنها با مصالح ساختمانی و محافظت بیشتر از لوله ها.
Building plumbing by built -in method
In this piping method, the pipes are placed in a part of the building that is not visible. In other words, in built-in plumbing, considering that the pipes are placed in the wall and floor and are covered with materials such as plaster or cement, they are not clear.
- The advantages of plumbing by built -in method
The most important advantages of piping in this way are as follows:
- در لوله کشی ساختمان به شیوه توکار، با توجه به آنکه لوله های در زیر مصالح قرار می گیرند، در مقابل عواملی همچون پوسیدگی و آسیب دیدگی مقاوم هستند. در لوله کشی به این روش استفاده از لوله ها و اتصالات پنج لایه نیوپایپ، سوپرپایپ، بی تی اس و آتاپایپ توصیه می شود.
- در این روش لوله کشی، مشخص نبودن کار موجب بهبود ظاهر ساختمان می شود.
- در لوله کشی به روش توکار، لوله ها از رسوب محافظت می شوند.
- با توجه به قرار گرفتن لوله های توکار در زیر دیوار یا سقف و قرار نداشتن آنها در معرض آسیب های محیطی، عمر مفید لوله ها بالاتر است.
The plumbing of the building by the following ceiling
Under-ceiling plumbing is one of the new and popular plumbing methods that are easier to implement and repair compared to other methods. In addition to that, the under-ceiling piping method is considered a suitable option for builders due to its many advantages. In this plumbing method, the plumbing equipment is placed on the roof of the building with the help of light materials.
- The advantages of sub -ceiling plumbing
Some of the benefits of under-ceiling plumbing include the following:
- When a building is piped under the roof, it is possible for the hot and cold water systems to pass through different paths and at the same time not to be in contact with the sewage.
- Compared to the built-in plumbing where the pipes are placed in the floor, this method has a higher safety during construction; Because there is no need to interrupt during floor construction and the possibility of damaging the pipes is reduced.
- Due to the placement of under-ceiling pipes under the false ceilings, not only the beauty of the houses increases, but also the interior space of the house is used in a better way.
- Since In building piping under the roof, the pipes are not exposed to environmental damage and material pressure, their life is doubled. In this situation, possible moisture in the building can damage the pipes less.
- When hot water pipes are placed on the floor of the building and underground, most of the heat is transferred through the pipes to the materials, and as a result, after the water leaves the pipe, its temperature is higher than before. decreases. This is despite the fact that in the under-ceiling piping method, due to the fact that the pipes are not in contact with the materials, the heat and the heat of the water inside the pipe are preserved, and in this way energy consumption is also saved.
- In under-ceiling plumbing, due to the pipes passing through the wall, problems such as cracks in the walls are prevented.
