Plastic conveyor:
Conveyor belt is a combination of the two words tape and conveyor, the word tape indicates a closed loop that is wide and flexible, and the conveyor shows the ability to transfer an object through a tape, which is also called a conveyor belt. Considering that the conveyor belt is constantly stretching and flexing, it must have enough strength against tensile and bending forces so that it does not break during the movement of objects. Conveyor belt systems, using two drums or They work with a ball that constantly circles the material on which they are wheeled. This operation is done with a set of hooks, gears, motor and gearbox and a wide rubber belt. The belt is then guided along the track by a series of rollers.
The rubber conveyor belt or conveyor belt consists of three main parts:
1. Low -coated laminate:
It is the part on which the load is placed, and the material and thickness of this layer must be suitable for the type of material to be transported and the working conditions of the belt. The chemical characteristics of the transported materials are effective in choosing the thickness and material of the cover rubber. Therefore, a rubber conveyor belt that carries sharp and cutting parts in the open air and in various weather conditions has a very different gender from another one that is responsible for carrying light and uniform items in a factory hall.
2..
This part has a special importance in the combination of conveyor belt and conveyor belt, because it is Manjid's responsibility to provide the required strength to carry the load and circulate the belt on the conveyor machine.
3. Low strap coating:
This part protects Manjid against the wear of different parts of the conveyor and the overflow of transported materials. Generally, the thickness of the bottom rubber coating is less than the thickness of the top layer coating. The upper layer of the conveyor belt can be smooth, porous (grip), V-shaped, etc. based on the angle of the load carrying slope and the type of load. In addition, the rubber used for the top of the belt can be resistant to heat, chemicals, and strong objects. Abrasive objects, etc.
So as we can see, choosing the right material for the upper and sole, the right manjid with the number of layers that can carry the desired load, and finally complete baking and Perfectly, the layers that are placed on top of each other have a decisive and fundamental role in producing a suitable conveyor belt.
