Installation of the isogam is a series of coverage and protective measures of wall and ceiling, which is done in different types for different buildings. The installation of isogam is done using special equipment such as the isogam installation to prevent moisture penetration in the wall and ceiling of the building.
Installation of an isogam, which is a highly used coating insulation to prevent caries in building tissues as well as optimizing energy consumption, is a highly specialized step. Therefore, doing this will have a lot of problems with direct damage. Inappropriate infrastructure, non -removal of wall and ceiling cracks, as well as lack of recognition and type of isogam suitable for building, are actually accompanied by loss of cost to your undesirable result.
Isogam installation criteria
The cost and cost of installing isogam installation is based on the main factors such as isogam area, isogam type, how to build, ceiling and wall status, and ultimately the equipment needed to install isogam.
Some of the uses of isogam
Refrigerators and Health Centers and Dams and Structures
Air Bridges and Concrete Bridges and Airports
Metro and Side Structures and Ceiling of Consoles and Prefabricated Buildings
Class Parks and Poultry Parks and Water Pipes, Gas, Oil
Non -Broad Foundations in contact with moisture
swimming pools and fish farming pools
toilets and kitchens
Benefits of Installation of Isogam
Suitable insulation against moisture
very light weight (4 kg per cubic meter)
affordable price
cleaning against bitumen and asphalt
fast, easy and cheap repair (staining)
need to be protective coating
Consideration of roofs, roofs and body and foil, etc.
its foil type is thermal insulation and has a reflection of sunlight.
is needed to install isogam than bitumen and asphalt.
The cost of installing isogam and bitumen
Installation of Isogam depends on the area and different things.
How to detect a high quality isogam
1. The inferior isogami is emitted from it. The reason for this unpleasant odor is that in the manufacture of isogam, mineral powders are used instead of bitumen or high -quality polymer.
2. If you do not use bitumen and high -quality polymer materials in the manufacture of isogam, you can handle a part of the isogam that does not cover the outer layers, so it can be seen on the black hand.
3. In order to test a high quality isogam based on rupture and tensile resistance, this moisture insulation must be drawn on every side and with any power. If the isogam is high quality, it should not be torn in these conditions and should not break from behind if it is folded.
4. Another method used to measure the quality of isogam is its temperature test. That is, a small piece of moisture insulation should be cut and then stored in the freezer for two hours. After that, the isogam should be removed from the freezer and folded up to 2 degrees, if it is folded or cracked from the part that is folded, it is not high quality and if it is not fractured and cracked, it is of high quality and has a high resistance to the cold
isogam plays a vital role in protecting buildings as a waterproof and moisture insulation. By selecting and installing the right isogam you can prevent water and moisture from penetrating your building and extend its shelf life.