Automatic door repairs in Karaj

Automation of doors has helped ease the work of users as well as creating higher security, and today it can be seen that these types of doors are used in many crowded places or construction complexes.

Applications of Automatic Door

Automatic doors are widely used in different buildings, but their use is preferred in some areas. Automatic doors in many buildings allow access, exit and passage in a modern and unobstructed way. Especially for buildings with high volume of traffic, it is suitable to use this type of doors. In the following, the sections where the need for automatic doors are felt are mentioned:

Health sector

In different hospitals and clinics and doctors' offices, automatic door systems are a health solution for patients, doctors and patients' companions to pass through different doors. By using these doors, there is no need to open the door manually anymore, and the spread of pathogenic bacteria and viruses on your hands is prevented.

Hotels and restaurants

An authentic and comfortable entrance is very important to people as the first welcome to guests in many hotels and restaurants. Restaurants and hotels are also places where a lot of people travel and constantly opening and closing the doors may be a bit difficult.

Shops and shopping malls

It is necessary to use automatic doors in shopping centers because people's hands may be full after shopping and they may not be able to open and close the door manually. These doors prevent the entry and exit of cold and heat to these places and save energy.

The reason not closed the sliding glass door

The initial door settings may not be properly adjusted or then manipulated.

Any obstacle in the rails, damages to mechanical parts, or any obstacle in the door of the door, makes the rails difficult and prevent the door from closing. A foreign body may be placed on your automatic door photocells and prevent the door from closing. Photocells are components of glass electric door mounted on both sides of the door or top of the door and on the frames. So check the photosleys in the first step, maybe something like gum or glue on them.

When the control system settings or motor sensors do not function properly, it can cause problems and thus not close the sliding automatic door.

The sensor may not work properly. In automatic glass doors to secure people passing the door, safety sensors are embedded in them, often working on infrared rays and have different types. The sensors are designed to determine if the body is not in the middle of the door, the automatic door is closed.

Automatic door failure

Erasing the remote code or running out of battery: In some cases, erasing the remote code or running out of battery can be one of the failure modes of the automatic door that disrupts the correct operation of the door. When the remote code is erased or the battery runs out, the door is unable to recognize the remote signals and therefore cannot respond properly to the remote command.
This problem is usually due to long-term use of the remote control or the use of old batteries and It occurs weakly. To solve this problem, you can restore the automatic door to normal by replacing the remote battery or by reprogramming the remote code. Failure of the arms or failure of the automatic door wire jack is one of the common types of automatic door failure that can affect its performance. Arms, as an important part of the automatic door movement system, play a role in power transmission and door movement. If the arms fail, it can cause the door to not move properly or stop moving. Also, a cut or failure in the jack wires can lead to power outages and improper door operation.
These problems may be due to physical damage such as impact, corrosion or cracking in the arms, or due to environmental factors such as humidity, Dust and weathering occur. To solve these problems, it is necessary to inspect, repair, and replace the jack arms or wires, if necessary, so that the operation of the automatic door returns to normal.

The Amin Gostaran Alborz Electronic Group performs all sales, installation and repair services of all types of automatic doors at the most suitable price and in the shortest possible time in Karaj.