Buying and selling industrial electrical panels

Low -voltage

Overall, it can be said that the low -pressure power panel is larger than the home electric panel. In addition, a variety of equipment is used to build low -pressure power panels, which we will explain below. The difference in the voltage of the types of electrical panels has made them divided into three different categories. Given the difference in the voltage of the types of electrical panels, it can be speculated that their manufacturing equipment is different. The voltage required for low -voltage power boards is about 5 volts.
Most of the places where low -pressure power panels are: converter stations, power stations, commercial buildings, refineries, factories, etc. >
The remarkable thing about the low -pressure power panel is the connection of its manufacturing equipment to each other. This connection is such that if one of the components of the powerboard is in trouble, other parts will have problems.

Types of low -pressure power panels:

The low -pressure powerboard also has different types. In this section, we want to explain about the division of low -pressure power panels based on the type of use below.

Original Power Panel

Handheld Power Panel

DB Power Panel for Lighting and Offices (Wall)

Intermediate or Control Paneels

Campaign Paneels

MCC

Slide

Main Power Panel:

The main power panel is located after the transistor, and the main power of the entire system is the responsibility of this type of electric panel. In the main electrical panel, they minimize the possibility of error using control and protective circuits. The feeders used in it are more than the air type.

Subdivided Power Panel:

The underwear panel feeds the feeders used in the main power panel. Their main use is the distribution of energy to different parts. The input and output of this type of panel is using compact keys. The protection of feeders is also done by the key mechanisms of the key. It should be noted that the underwear panel does not require a specific steering circuit.

DB powerboard

Most DB electrical panels are made of wall and for offices. The purpose of making these types of electrical panels is to minimize the occupied space. The miniature key or MCB is commonly used for the output and output of the wall power panel.

Control Panel:

The purpose of using a control panel is to create communication and control between the main panels and MCC. Depending on the application and type of system used, the control panel has automatic, semi -automatic and manual types. In systems such as glass factory, steel, etc., which is a continuous production line, the work is highly sensitive and must be controlled constantly, usually using control panels. To minimize the probability of error by constantly controlling the production line. In addition to monitoring and controlling the system, there are other benefits that we will mention below.
Easy troubleshooting, rapid rejection of defects, reducing the volume of electrical and mechanical components from other benefits of using This is a type of electrical panel.

Capital Power Panel:

The use of induction motors and selfie loads causes the system to be killed in the system. One way to reduce the power of lost power is to use the capacitive power panel in the system. The capacitive power panel by modifying the power coefficient eliminates the effect of induction engines and selfie loads.

MCC power panel

often use the MCC powerboard in industries, companies and offices. The MCC powerboard is powered by the main panels. This type of electrical panel has different controls and protections.

Sliding Power Panel:

Given that it is costly to provide space for electricity projects, today they are trying to maximize the space used. The sliding panel is used for this purpose. Using sliding powerboards allows you to put a lot of bulk feeders and bulk control circuits in one cell.

Another advantage of using drop -down power is that if there is a problem in each Of the pieces can easily separate the cell and repair the parts.