Different types of motor sprayers perform spraying operations with strong hoses. The tanks of this equipment are filled with the intended toxins. The hoses are then sprayed to all the desired points.
spraying hoses are manufactured in different sizes, the most used in the size of 15.5 inches and 8.3 inches. These hoses are usually produced in yellow and the standard area of a 50 -yard sampling hose ring is 45 meters.
Gender and application
The hose for spraying is made of polyvinyl chloride (PVC) which is highly resistant. Hoses are used for the transfer of agricultural pesticides, and since they are very dangerous and fatal for health, they must have high quality and durability and prevent the leakage of toxins. Due to their favorable pressure tolerance, they are used in spraying of fields, greenhouses and gardens, washing warehouses and large niches, etc.
The most important features of good sampling hose
High flexibility of hoses: These hoses should be highly flexible because of their use in large areas to be easily used and not pushing for its operator.
B> Home Symbol Hose: These hoses are of high quality and longer shelf life than conventional hoses.
Rupture resistant: Since these hoses are for transferring Different toxins are used. Their high resistance is very important. In the event of a rupture of the toxins in it, it will damage people.
High work pressure tolerance: Pressure tolerance is one of the important factors in making a sprayer hose and designs these hoses so that up to 220 pressure. Tolerate the load.
Three -layer hose
These hoses, which are most commonly used in motor sprayers such as frame and bee models, have an acceptable price and life. The famous model of this hose is known as the 8.5 three -layer. Most of the manufacturers of this hose model are Chinese companies, which can be mentioned as Excel, Bridgestone and Techno. The 3 layer of spraying hose is suitable for spraying steps in gardens and fields and is sold in 50 yard rings. You can also connect a hose ring or less if you need a longer length.
Five -layer hose
5 layer of spraying hose is the best choice for gardeners who intend to perform different stages of spraying in the long run with heavy workload. The extraordinary five -layer hose has made your imagination easier to spray and resist the rupture when spraying. The 5 -layer model is manufactured with an 8.5mm thick and 10mm thickness and the two ends of the interface are pressed using an automatic hose press. This type of hose is manufactured in the Iranian market in two types of Chinese and Korean, which are the Korean model made by Panaflex and Jay Flex, a 5 -layer of durable and quality spraying hoses in the Iranian market.
Types and differences of spraying hoses:
1. The size:
In most Chinese and Korean hoses and even Turks in the Iranian market, the length of the ball or the hose ring is calculated as a yard. The mold area of these hoses is 50 yards. Each yard is 91.4 cm, which is 50.7 meters. Most sellers sell these hoses as a 50 -meter hose to the farmer.
2. Size:
There are two spraying hoses in the Iranian market that come with two 8.5mm and 10mm hose features. These two are the internal diameter of the hoses. In size 8.5 are generally used for lighter work and for lower output pressure pumps, such as bee sprinkler. And the size of 10 for the back of the tractor pumps and with high output power.
3. The number of layers:
Along with the size of the hoses, the multilayer hose is also important. Multiplayer of the hose means that the greater the number of layers of the hose, the greater the hose. Three 3 -layer and 5 -layer models are the most common in the market. For greater resistance in some hoses, they use yarn to increase pressure resistance.
4. Press:
The pressure created by spraying pumps is between 100 times and 250 times. Therefore, the tolerable pressure for each hose varies according to its multilayer and how the factory is built.
