Types of construction valves

With the advancement of technology with new design methods, construction valves are used to fit their installation and performance; So before you buy valves, first research and consider all the factors needed for an ideal purchase. Also, do not forget that the lifespan of the valves is high except in a few cases and is used for a long time, so if you do not have good quality or are made of inferior materials, you will face a variety of uses in a short period of time.

Hub water valves are more commonly mounted in the kitchen and on a dishwasher. These types of water valves are the first type of gasket valves that work with only one lever. In this way, the lever rotates around a ball cap at the top of the main body of the milk. However, the lever controls a plastic or metal ball inside the milk body. It is by this lever that the water intensity and temperature are adjustable. Hub valves, with a ball mechanism and always exposed to water, usually cause corrosion, which makes this type of valve permanently

is one of the most modern valves in the market for ceramic disc valves. These types of lions are also one of the single -lever, and their lever is on a widescreen cylindrical body. The disc valve combines cold and hot water into a tank called pressure balance cartridge. There are two ceramic discs at the bottom of the tank that control up and down the water pressure. The water temperature is also adjusted by rotating the lever to the right and left. These valves are of high quality and need less repairs than other valves. On the other hand, disc valves are in the category of expensive valves

Cartridge valves are placed in the category of two levers, as they look quite similar to two -lever compressive valves, and the only difference is that the cartridge valves are non -gaskets and compressive valves are placed in the gasket handle. . It should be noted that despite the apparent resemblance between these two types of faucets, you can easily notice the difference in their performance when used; Because the compressive valves need to apply pressure on the gasket when rotating the lever. In other words, the outflow of water from the valve is not easily done by cartridge valves; But in cartridge valves with the slightest rotation of the lever, it is possible to cut or connect the water flow very quickly and easily.

This type of valve has existed in homes from ancient times. Pressures are among the valves that have a gasket that is often seen in older homes, though these lions are also used today with changes in new buildings. These valves are among the cheapest water valves. These types of valves separate the cold and hot water, and usually should be put more pressure than other water valves to close or open it. These valves work with gaskets, and this is the reason for the more leakage of this type of valve than the rest of the valves, because of the normal pressure on them, they are constantly abrasive and consequently replacing the gasket.

This type of faucet has a motor sensor. The motion sensor ensures you to use the water directly and efficiently. Only by moving your hand on the motion sensor, the water begins and begins to flow. This is a good choice for the kitchen and the bathroom. This type of faucet is known for its help and effect on hygiene. It also reduces water pollution while it also makes it easy to adjust water temperature. The most important of which is the tap.