False ceilings are commonly used as interior architecture of buildings, which give a special beauty to the interior of the buildings. These ceilings are available in a variety of types, including Robitz, aluminum, PVC, glass and composite.
False ceiling is installed as a structure of the building and architecture industry under the main roof and has various types such as false ceiling, acoustic, PVC, aluminum and more. The choice of one of these products depends on their use of architectural beauty and the benefits of preventing audio or heat loss.
What is a false ceiling?
Dropped celing is an architectural element in the building industry that is implemented as a cover under the structural roof or the main roof of the building. In addition to covering the main roof installations, this ceiling also has other roles such as preventing energy loss and the beauty of interior architecture and consists of different parts of rebar, corner, plastering, etc.
Types of false ceilings
False ceilings have different types depending on variables such as cost, weather conditions, architectural applications and materials but are divided into two types, the first does not require access to the main ceiling, but in the latter case Not possible except with destruction operations.
Robitz and Doddy False
In recent years, Robitz's false ceiling has been widely used. As mentioned, Robitz is a sheet that is connected to the sub -network via reinforcement wires. Robitz is available in two forms of flat Robitz (used in small openings) and prominent Robits (used in large openings).
False acoustic ceiling
Wherever the noisy atmosphere speaks, the best suggestion is undoubtedly a false acoustic ceiling. The acoustic false ceiling is used to create a kind of audio insulation. It can be made from raw materials such as cardboard sheets, plaster plates and fabrics. It is appropriate to use these ceilings in public places such as cinema, lecture halls that require sound insulation. Of course, in places where voice echoes are very important, such as sound recording studio, aluminum or glass wool is used in addition to acoustic sheets.
PVC false ceiling
PVC is one of the most commonly used materials in the construction industry because of its use, cheap and economical, and because of its rapid assembly, it significantly increases the speed of work. Its benefits are the beauty, which makes the facades of buildings very attractive.
False aluminum ceiling
In these ceilings, aluminum is used in the form of tile, its dimensions are 1*2 and may be rectangular. The highest use of aluminum false ceiling is in places that require access to the ceiling; Laboratory, hospitals, airports and other public places are among the places used by these types of ceilings.
False ceiling of prefabricated plaster
These false ceilings are usually made of aluminum and are performed on aluminum plaster operations. The use of these types of ceilings has some benefits in this section:
▪️ This type of false ceilings are very lightweight so that in the estimates of weight per square meter, It has been approximately 1 to 2 kg.
The speed of installation of these ceilings is very high.
The use of these types of ceilings will adjust the temperature and humidity of the environment. There is no change in their color.
have the ability to replace.
The benefits of false ceiling
The use of false ceilings is very common today and architects use them in their designs. These ceilings have attracted a lot of attention in architecture, so that designers use them to create a beautiful space inside the homes and public places. Here are some of the benefits of using false ceilings:
Conclusion
False ceilings are available in a variety of types such as Robitz, Acoustic, PVC, Aluminum, Plaster, Combined and Grillium, each of which has its own structure and benefits. The use of false ceilings is economically viable compared to ordinary ceilings, as well as giving places to places. Therefore, it can be said that false ceilings should be used as much as possible to improve the interior of the building.