Generally, after purchasing an electric shutters to install it, a number of equipment is needed, which is called electric shutters. To install an electric shutters what you want to install and want to install and set up a professional installer, you should use a series of electric shutters and fittings. Some electric shutters are required, and some accessories are used to make the process of installing the electric shutters and place it in the desired location. Keep in mind, however, that most manufacturers and electric shutters bring the necessary tools and fittings and no longer need to make them personally.
Supplies needed to install electric shutters
There is always a number of tools and equipment you need to install and launch an electric shutters. Some of the most important equipment needed for installing electric shutters include:
- Welding Machine (Trans or Inverter) with a power of at least 200 amps for welding sections and metal fittings of electric shutters.
- stone machine Milling for cutting iron and stone to pave the way of installing electric shutters.
- strong and suitable drill with a variety of drills for piercing metal, stone and wooden surfaces.
Types of drill for demolition of stone, brick and concrete walls for placing electric shutters frame
- Spring wiring for the transfer and connection of the wires to the desired points. Remember, however, to prevent caries or wires from using the wires and pass the wires through it.
- meter, ruler and alignment for accurate and alike electric shutters frame dimensions. And the alignment of the columns and other parts.
- Cable and wire. It is noteworthy that the presence of wires and cables is one of the main electric shutters; Because in the process of installing an electric shutters (to turn on and use drills, milling, pixels, etc.) and then we need it to launch an electric shutters. 10 cm and required for the location of electric shutters.
The main parts and components of the electric shutters
Electric shutters blade
Electric shutters' blade is designed and built according to the consumer's need in different types and sizes. The blades are usually made of steel, rust iron, aluminum, polycarbonate, etc. Based on the location and weather conditions, there are different options for selecting and installing. For example, in humid and humid areas such as the north of the country and the Persian Gulf, they often use aluminum electric shutters and polycarbonate shutters; Because they are resistant to humidity and temperature and are less eroded and decayed. In other words, the blade and the material are one of the main parts and accessories of the electric shutters.
Electric Shutters Engine
Electric shutters are also one of the most important parts of the shutters. It is an electric. So that the absence of this piece or the lack of proper connection would cause the electric shutters to operate. In the Iranian market, there are often two types of tubular and side -by -motors for electric shutters, and consumers are satisfied with these engines. It is noteworthy that toblar engines are used for low -traffic and light doors, and vice versa, the side engine is used for high -income and heavy doors.
Shaft (pipe)
> This piece is used to install electric shutters. This is how the engine is turned on and the blades are wrapped around it.
Emergency Power System (UPS)
This system is often in side engines. It is used and the shutters can be raised and lowered several times at the time of power outage.
Plate plate
This piece is installed on both sides of the left and right electric shutters and is tasked with holding the shaft at the top of the shutters.
Electric Shutters Remote
Using this piece you can command and open and close the electric shutters from a few more distances.
BR> Electric Shutters Rail
Rail is a profile that is installed on both right and left of the electric shutters. The blades are then placed inside and are regularly up and down.
other electric shutters and appliances of "Shutters Accessories" can be named hair, caps, cans, and springs.
Price of electric shutters blades
One of the most important parts of an electric shutters is its blades. The type of blades, in addition to ensuring the beauty and security of your electric shutters, also have the most impact on the price of the electric shutters. The impact of the type of blade on the price, dimensions and sex of the blade. For example, the larger the size of the electric shutters and the size of the blade, the higher the price of the blade. Galvanized blades are also lower than other blades. This type of blade is suitable for those looking for a cheap blade.
The best type of electric shutters
As we said, the electric shuttle blade is the most important component in the electric shutters. Types of electric shutters blades in a variety of designs and colors, including electric shutters, are manufactured by various brands. The best type of electric shutters should be selected according to the weight of the electric shutters, location and height of the door. That's why consulting with experts in this field will be a great help in your choice. But in addition to the features mentioned, the best type of electric shutters can also be selected in appearance. The blades are either curved or flat. The width of the opening in or window can sometimes determine whether the flat blade is the best type of blade or a convex blade. Aesthetically, personal taste can also be a reason to choose one of the two.