Introduction
Benefits of Polymer Pools: Why is the right choice?
These benefits are the main reason for the popularity of these pools around the world, especially in Fars province:
Fast and Easy Installation: Unlike concrete pools that require a lot of time and costs to build, prefabricated polymer pools are installed in a short period of time. This feature allows you to use your pool in the shortest possible time.
Excellent insulation: The polymeric materials used in these pools are excellent insulation against water penetration and heat loss. This reduces the cost of maintenance and energy consumption.
High Resistance: Polymer pools are highly resistant to UV rays, chemicals and temperature changes. This feature extends the life of the pool and reduces the need for maintenance and maintenance.
Design flexibility: Polymer pools can be designed and implemented in different shapes and sizes. This flexibility allows the construction of pools in limited spaces and with custom designs.
Affordable: Given the benefits mentioned, prefabricated polymer pools are more cost -effective in the long run than concrete pools.
Environmental Adaptation: Polymer materials used in polymer pools are recycled and do not damage the environment.
Safety: Polymer pools are highly secure due to their design and structure and minimize the risk of leakage and damage to the surroundings.
Drak Polymer, by providing high -quality polymer pools in accordance with world standards, assures you that you will benefit from the numerous benefits of these types of pools.
Step One: Preparation of the pool installation
Proper preparation of installation is the first and most important step in launching a pre -made polymer. This step includes the following steps:
Select the right place:
Sunlight: The installation should receive at least 6 hours a day of sunlight. Sunlight helps to warm the pool water and reduce energy consumption.
Access: Easy access to the installation location for the transfer of materials and equipment is essential.
Distance from the trees: Avoid installing the pool near the trees, as the leaves and roots of the trees can damage the pool.
Slope of the Earth: The land should be as smooth as possible. If there is a slope, you should align the ground or use appropriate solutions such as using sand layers.
Measurement and Marking:
Mark the size of the pool on the ground according to the dimensions of your pre -made pool.
Consider space as much as the pool, plus sufficient space for plumbing and access to equipment.
Digging the pit:
Drag the pit according to the dimensions and depth of the pool.
The walls and the pit should be smooth.
In the event of groundwater, measures should be taken to drain and prevent water from penetrating into the pool.
Preparation of the pit floor:
Cover the bottom of the pit with a layer of soft, dense sand of 10 to 15 cm thick. This layer prevents water from penetrating the pool and aligns the lower surface of the pool.
Compress the sand well.
Preparation of the walls:
Cover the pit walls with a layer of soft, dense sand of 10 to 15 cm thick. This layer prevents damage to the pool walls by contact with the soil.
If needed, use drainage systems to prevent water accumulation around the pool.
Drak Polymer will accompany you in this important step by providing specialized advice on the preparation of installation.
Step Two: Polymer Pool Installation Installation
After preparing the installation site, it is time to install the pool. This step includes the following steps:
Transfer of the pool to the installation site:
Move the pool carefully and caution to the installation site.
Avoid damaging the pool during displacement.
Put the pool in the pit:
Put the pool carefully in the pit.
Make sure the pool is aligned.
If needed, use alignment tools to adjust the position of the pool.
Pool alignment:
Make sure the pool is balanced in all directions.
If needed, use sand substrates to align the pool.
Fill in the empty space between the pool and the walls of the pit:
Fill the empty space between the pool and the pit walls with soft sand and dense sand.
Carefully compose the sand in a layered and accurately layered layer.
Avoid putting too much pressure on the pool walls.
Installation of peripherals:
Install pool peripherals (such as pumps, filters, water purifiers, etc.) as manufacturer's instructions.
Make sure the proper connection of pipes and connections.
Drak Polymer by providing professional installation services makes the process of installation of prefabricated polymer pool for you.
Step Three: Logistics and Operation of the Pool
After installing the pool, it is time to set up and operate it. This step includes the following steps:
Connect to power:
Make the pool electric connections in accordance with the manufacturer's instructions and with the safety tips.
Get help from a experienced electricity to do this.
Fill the pool with water:
Fill the pool with clean water.
Avoid applying too much pressure on the pool while filling.
Water treatment system:
Launch the water treatment system according to the manufacturer's instructions.
Ensure the proper functioning of the water treatment system.
Chemical regulation of water:
Adjust the pH of the water.
Add the amount of chlorine and other chemicals needed to the water.
Use water test kits to measure water parameters.
If needed, use water treatment specialists.
Operation and Maintenance:
Enjoy the pool!
Regularly clean the pool water.
Clean the filters regularly.
Control the pH and chemicals of the water regularly.
If you see any problems, contact Drack Polymer Specialists.
Key Tips for Keeping Polymer Pool in Fars
Proper maintenance of the pre -made polymer pool helps to maintain a longer life and maintain water quality.
Here are some key points for keeping the pool in Fars province weather conditions:
Regular cleansing: Collect leaves, dust and other contaminants regularly from the pool surface.
Washing the filters: Rinse the pool filters regularly (usually every week).
Water PH adjustment: Hold the pH of the water in the range of 7.2 to 7.8.
Water disinfection: Disinfect the pool water using chlorine or other disinfectant.
Water test: Regularly test water parameters (pH, chlorine, alkali, etc.).
Sunshine Protection: If possible, use a canopy or pool cover to protect water from severe sun.
Refrigerator Care: In the winter, in the colder areas, prevent the pool freezing. This can be done by draining the pool water, the use of ice creams or other solutions.
Periodic Inspection: Examine the pool and its equipment periodically and if you see any problems, take action.
Using specialized services: If needed, use Drack Polymer Specialists for Pool Maintenance and Repair.
Drak Polymer helps you enjoy your long -term pool by providing maintenance services.
Conclusion
Installation and commissioning of a pre -made polymer pool is a simple and easy process that you can successfully do with the tips mentioned in this guide. Choosing a polymer as your companion along this path ensures excellent quality, confidence and after -sales service. By offering high quality products and specialized services, we help you have a fun and unnecessary experience of having a polymer pool.
By choosing a polymer Drak, you have taken an important step towards having a personal or commercial water space. We are next to you to make this dream a reality.
