Importance of proper maintenance of metal sprinklers in agriculture

Familiarity with the structure of metal sprinkler tripod

The main components of the tripod

Methods

1. Periodic cleaning after each irrigation season

2. Lubricating and lubricating to connections

In the Zagros production, in the final stage of assembly, the surface of the thread is coated with special protective oil to be more resistant to friction.

Tip: Apply a small amount of industrial grease on the threads every few months to make it easier to open and close the sprinkler.

3. Keep in a dry and shade environment

Metal sprinkler tripod if not used for a while should be stored in a dry, direct sunlight.

Exposure to rain and sunlight causes the galvanized layer to be worn out. As a result, it is advisable to keep the tripods on wooden or palette stands after the irrigation season is completed so that they do not contact the earth's moisture.

4. Regular checking of the bases in terms

kicks caused by high water pressure or sudden sprinkler movement may cause deformation in the bases.

Before each installation, you need to ensure a tripod stability. If partial bending is seen, it can be corrected with a rubber hammer or appropriate tool.

Zagros manufacturing with a triangular design in low base connections minimizes the likelihood of corrosion in its new models.

5. Use stainless paint in case of surface damage

If the galvanized coating disappears by impact or scratch, the rust may begin.

In this case it is better:

Clean the place of damage with soft abrasives.

then apply a metal stainless paint.

After drying, cover the protective oil on the surface.

This will greatly extend the life of the metal sprinkler.

6. The correct adjustment of the base angle on the sloping ground

Kuhdasht agricultural lands often have a natural slope. If the tripod is not adjusted correctly, the water pressure may disrupt the balance and lead to the fall of the sprinkler.

to prevent this problem:

Open the angle of the base so that the center of gravity is lower.

use a rock or piece of heavy metal to fix the under the base.

Use Zagros Metal Drinks to reduce maintenance costs

Zagros Kouhdasht manufacturing produces products that need less maintenance using hot galvanized technology and accurate industrial design.

compared to similar products, the Zagros Metal Dice has the following features:

full resistance to rusting even in wet conditions

firmly connected with an anticipated coating

reinforced pedestals with welding CO2

ergonomic design for quick installation

These properties reduce the cost of maintenance by up to 5 % annually.

Role

The impact of the environment on tripod durability is undeniable. The amount of moisture, soil type and chemical compounds in the water can increase corrosion rate.

In alkaline soils

The bases are less likely to rust, but there is a possibility of discoloration or opaque levels.

In acidic soils

should be used with additional protective coating because it is more likely to be corrosion.

In windy areas

Installation and base weight are more important and the bases need to be aligned properly.

Zagros manufacturing, with the knowledge of these differences, depending on the type of soil of the customer's area, has allowed special order with thicker galvanized coating or heavier base design.

The benefits of regular maintenance of metal sprinklers

Extension of useful life to more than 5 years

Reduce the need for annual repairs and costs

Prevent water leakage and pressure drop in irrigation system

Maintain the quality of water spraying and better growth of agricultural products

Time and energy saving on the farm

For this reason, many experienced farmers of Lorestan recommend that they only produce their crops from manufacturers to provide technical and maintenance services in addition to production, technical and maintenance services; Like the Zagros Kuhdasht production.

How Zagros Technical Services help maintain metal sprinkler tripod

Zagros production is not just a manufacturing plant; Rather, it is one of the active technical support centers in the west of the country. Services of this set include:

Presentation of Product Maintenance Manual

Galvanized Oil Color and Oil

phone support to fix installation defects

On -site technical and repair service for major customers

For this reason, farmers have specialized support even after purchasing Zagros Metal Tripods.

Safety tips when storing and cleaning metal sprinkler tripods

These tips make the tripod healthy in physical and chemical conditions.

Common mistakes that reduce the sheer life of metal sprinklers

• Release the base on the ground after the end of the irrigation season
• Painting with a particular color of metals
• Intense taps to open the sprinkler while rusting
• Using acid detergents for cleaning

Avoiding these errors of the metal sprinkler tripod to twice the life of the metal sprinkler.

Final speech

regular maintenance and care of the metal sprinkler tripod plays a decisive role in reducing agricultural costs and increasing water productivity. By following the recommendations mentioned in this article, the useful life of the tripod can be extended to years.

At the same time, if you use high -quality, reputable manufacturers such as Zagros Kuhdasht production , the need for heavy maintenance and frequent repairs will be minimized. Because Zagros products are manufactured by industrial standards and galvanized coating to perform the best in the climatic conditions of Lorestan and even the country's arid regions.

For this reason, Zagros is not only a producer, but also a reliable Iranian farmers on the path of intelligent and sustainable irrigation.