Why is water heater service and repair vitally important?

Signs of failure and the need to repair the water heater

1. Not heating the water enough

2. Fluctuation of water temperature (cooling and heating)

3. Changing the color and smell of water

4. The sudden extinguishing of the candle

5. Abnormal noise

descaling; The most important part of water heater service and repair

Review of key parts in wall water heater repair

Diaphragm (rubber washer): This part is responsible for detecting the opening of the hot water tap. If the diaphragm is worn or torn, the water heater will not turn on.

Thermocouple and coil: are the safety system of the device that cuts off the gas flow when the flame goes out to prevent gas leakage.

Heat exchanger: It is the heart of the water heater through which the water passes. Perforation or clogging of the exchanger is one of the most expensive parts of the service and repair of the water heater, which we try to repair as much as possible instead of replacing it.

Water and gas regulator: This part is responsible for adjusting the inlet pressure, and its failure leads to temperature fluctuations.

Ahmadi engineering technical services; A safe choice for you

You may ask why you should choose Ahmadi Engineering Technical Services for service and repair of your water heater? The answer lies in our quality, speed and commitment.

1. Trained and experienced technicians: All our repairmen have completed specialized water heater service and repair courses and are familiar with the latest troubleshooting methods. They not only replace the defective part, but also find the root cause of the failure.

2. Use of original parts: At Ahmadi Engineering Technical Services, we are committed to use only original and company parts if parts need to be replaced. Using fake parts in water heater service and repair may reduce the initial cost, but in the short term, it causes more and dangerous failures.

3. Transparency in pricing: The service and repair costs of the water heater in our collection are completely transparent and based on the Union's price list. Before starting the work, the cost limits are announced to the customer so that he can make a decision with ease.

4. Speed ​​in dispatching power: We know how much a water heater failure can disrupt daily life. For this reason, after you contact the technical services of Ahmadi Engineering, the nearest work service will be sent to your place.

Although the failure of the device is inevitable, but by observing some tips, you can increase the time intervals of water heater service and repair:

• Installing a sediment trap filter: Installing a magnetic or polyphosphate filter in the cold water inlet of the water heater will largely prevent solutes from entering the device. Very high temperatures increase the rate of deposition. A temperature between 50 and 60 degrees Celsius is ideal.
• Chimney Check: Always make sure the chimney path is open and the H cap is installed. This issue is directly related to your life and is one of the safety issues in water heater service and repair.
• Annual service: Don't wait for failure. Once a year (preferably before the start of the cold season), ask the technical service of Ahmadi Engineering to service your device.

Many people try to personally service and repair the water heater in order to save money. You should note that the water heater is a gas-burning device, and the smallest mistake in closing the gas connections or adjusting the burner can lead to disaster.

Carbon monoxide gas leakage (silent killer) is one of the dangers that arise in case of improper installation of the chimney or bad flame. Also, acid washing without safety equipment can seriously damage your skin and lungs. Therefore, common sense dictates that you entrust the service and repair of the water heater to the experienced specialists of Ahmadi Engineering Technical Services to ensure the safety of your family.

When you call us, the water heater service and repair process is done as follows:

1. Registration of the request: You declare the problem of the device and your address.
2. Initial troubleshooting: The repairman arrives on site and checks the device.
3. Declaration of cost: Based on the failure (need for descaling, diaphragm replacement, regulator repair, etc.), the cost will be announced to you.
4. Performance of repairs: Service and repair process The water heater is done with precision and speed.
5. Final test and delivery: The device is turned on in the presence of the customer, hot water is tested and the absence of gas leakage is ensured.
6. Service guarantee: We guarantee the quality of our work.

Ahmadi Engineering technical service team has no restrictions on the device brand. Whether your water heater is Bhutan, Iran Radiator, Lorch, Polar or any other foreign brand, we have the necessary expertise to service and repair your water heater. Each brand has its own parts and components, and knowing the explosive map of each model is a skill that our technicians have.

For example, in new generation water heaters that have advanced smoke and heat sensors, troubleshooting requires accurate multimeter devices. Service and repair of older water heaters, which do not have these sensors, require high experience for mechanical adjustment of parts.

In this section, we answer some of the frequently asked questions of customers of Ahmadi Engineering Technical Services:

Is water heater service and repair done on site?

Yes, in 99% of cases, all services are performed at your home or workplace, and there is no need to move the device. Except in special cases where the converter needs major welding repairs.

How much does descaling cost?

The cost varies depending on the amount of sediment and the model of the device. But be sure that the prices of technical services of Ahmadi Engineering are completely competitive and fair.

Why is the hot water pressure very low, but the cold water pressure is good?

This is a definite sign of fouling of the exchanger tubes. With a simple water heater service and repair and descaling, the hot water pressure will return to normal.

How often should the water heater be serviced?

Our recommendation for areas with high water hardness is once every 6 months and for normal areas once a year.

The water heater is a device that our comfort depends on. Ignoring its small problems can lead to big and costly failures. The professional team of Ahmadi Engineering Technical Services, relying on technical knowledge and advanced tools, is ready to provide the highest quality water heater service and repair services to you, dear fellow citizens. Our goal is to satisfy you and create stable heat in your homes. Don't worry anymore about the cold water or the sudden shutdown of the water heater; With just one call, our experts will be by your side. Book your water heater service appointment today and feel the difference in service quality.