The technical specifications of each electric motor are written and engraved on its body plate. Reading the nameplate of the technical specifications of the electric motor helps a lot to design the circuit and choose the correct contactor for the electric motor. When selling an electric motor, the seller asks you to state the specifications you need. Industrial equipment engineers consider these factors when the customer buys an electric motor and determines the price of the electric motor. By narrating the required specifications and required power, industrial equipment consultants can help you to choose the best model and types of electric motors. Next, you will read the electrical parameters of electromotors: Serial Number: This number is engraved by the manufacturer on the body of the electric motor.

Type: three-phase or single-phase electric motor, the alloy of the body and its type. You can see and check its type specifications in the table. The price of the three-phase electric motor, which has wider and wider uses, is higher than the Iranian and foreign single-phase electrogearbox.

Current or A: This factor shows the maximum allowable current of the electric motor. When buying an electric motor, you should note that the intensity of the input current of the device must be lower than the declared value A. Otherwise, you should expect the device to fail.

Voltage or V: The number listed as the voltage in the motor specification table, range Describes the operation of the device. The input voltage to the electric motor should not be more or less than this number. Higher operating voltage can also increase the price of the industrial electric motor.

Frequency: You can see the operating frequency of the device in this section. If more than 1 frequency is mentioned for the device, other specifications must be calculated and checked according to the same frequency. Specifies. From this number, you can adjust the voltage of the power supply. When buying an electric motor, you should also pay attention to the phase of the device. will be This number shows the ratio of real power to apparent power in percentage. When buying an electric motor, you should pay special attention to its power and power factor.

Output power: You can find the mechanical output power on the shaft by the name of kilowatt or horse power (KW or Horsepower) in the table. See specifications of electric motors. One of the factors that can affect the price of an electric motor is its output power.

Leave a comment or ask a question about Technical features of the electric motor.