Cobblestone paving due to the smallness of the stones, the paving work is difficult and difficult because the unevenness and unevenness of the stone must be completely removed and it makes the stones shiny and polished. Isfahan stone paving companies provide these services. They do it. For grinding the carcass stone, which is almost a stone, it is a little harder and stronger compared to other stones, because diamond bits are usually used for the initial smoothing of the carcass, which gradually become softer and at the end the head becomes shiny and polished. /p> The deeper the level of surface quality, such as parking lots that have spilled diesel or gasoline on them and tires have traveled on them, in this case, it is better to remove only one layer of stone using a sanding machine to restore the shine and Gained clarity. The carcasses should be done using a device called an expander, which has a very high smoothing power. After smoothing the carcasses, it is time to polish the stones, because it is very complicated, using layering and puttying by sandpaper and machines. It is easily done.
Carcass stainless steps
Some people may have a different idea when they come across the name of rubble stone; But in fact, it is called the same stones that are crushed due to cutting in a stone factory or workshops and can no longer be used; But these stones are very suitable for paving stones or building floors, due to their small size, the surface becomes uneven during the carpeting process, so you have to use the sub-stone of the carcass floor to level the surfaces.
How much time is the carcass shiny?
Carcass flooring takes a lot of time compared to other paving stones and flooring, and polishing the work of every carcase or carcase flooring is not possible. If you want to make your broken floors and pebbles shiny and transparent, you can get help from active, reliable and professional companies in this field.
The most appropriate time of carcass
Carcass flooring is time-consuming compared to other stones; Because it is very difficult to smooth, polish and shine the stones of the carcass.
Steps to save paving with carcass
Two main factors are effective in sanding paving stones or rubble, including:
* stone sander * Type of stone Due to the fact that the rubble stone has an irregular arrangement and flooring in terms of appearance, but based on the absence of dirt or the smoothness of the surface, it plays a significant role in the beauty of the paving stone, so it is necessary to perform flooring, layering, and sub Italian on the rubble stone after the paving steps are finished. to be The question that arises is whether the carcasses are cleaned by washing the machine? It must be said that yes, it is true that cement and plaster are destroyed, but the pterygium is still standing. There is an idea among people that it is not possible to smooth the surface after paving; But it must be said that this notion is completely wrong, because whenever you want, using the sanding process, you can make the surface smooth and shiny, even on the stone carcasses or any other type of stone you can imagine.Carcass carcass
In most cases, it is used for yards, parking lots, and some lobbies, which make the surfaces smooth and uniform, which makes the carcasses shiny, which can usually be obtained from quarries and stone factories, although it can be easily purchased at very low costs. The process of sanding the carcass is not the same as stones in the sizes of 40x40 or 50x50, but if you want to compare them mutually, it should be said that due to their small size, it is a little more difficult, and its stonework is used on the floor or wall. In very large residential and commercial complexes, due to their size and extent, flooring is much more difficult and time-consuming; But it is impossible to understate the importance and great effect of paving the floor in the health and cleanliness of the home environment on the health, morale and performance of people in the environment.