Scrap stone is a stone that is used unchanged as it was fired. If they shape the carcass stone into an ax in the workshops and make it regular, the quarry stone is obtained. In this article, we are trying to deal with the carcass stone of Gwara. What we are trying to address in this article is the following:
* The use of Qavareh carcass stone * Steps to prepare the building for working with Qavareh rubble stoneUse
Quarry stone is used in various cases, which we mention below.
* In the staircase and foundation of the building * As flooring * In the wall decoration of the building
Building steps
In the construction with quarried stones, depending on the requirements and requested specifications, the dimensions of the stones are cut to the desired size with an ax, and the arrangement of the stones should be such that the stones are locked together.
When using quarried stones, Pay attention to the following points: A) The stone wall must be built and prepared. b) In porcelain stone, it should be observed that the porcelain stone is done in the form of a head, and the rows are locked and closed. At least the root of the stone should not t) Metal braces should be placed inside the mortar and wall and braced to the column. (e) The thickness of the wall should be less than an acceptable limit. This standard size for the wall is 40 cm. c) The thickness of strapping should be between 10 and 25 mm. Stones are divided into two categories: * Natural stones * fake stones (artificial)
Natural rocks
Natural stones are divided into several general categories:
* River stone: As a result of river stones rolling on top of each other, river stone is formed. * Mountain stone: These stones have a sharp edge and are pulled out directly from the heart of the mountain. * Carcass stone: It is obtained by exploding or crushing a large piece of rock. These stones have no special shape and are irregular. * Sheet or board stone: These stones are not strong enough. The minimum thickness of these stones is 8 cm.Handled stones (fabricated)
Quara stone: The stone is created by shaping the carcass stone.
Wind or vein stone: This type of stone is cubic. They are shaped. Bandkobe-e stone: a stone that is cut in two circles with a width of 1.5 to 3 cm with a pen. Size stone multifaceted stone Multifaceted stone plaque's stone