You probably know that a 45 or 90 degree elbow is used in all the sewage pipes leading to the well, which is attached to the ostrich or siphon. The work of the siphon is to prevent gas and sewage smell from entering the building. When the water enters the siphon, a part of it remains inside the siphon and prevents the smell from entering the building through the sewer pipe. But the presence of this bent pipe in the sewage disposal network of buildings increases the possibility of pipe clogging. Due to the presence of this bend, wastes and garbage entering the pipe are trapped in this bend and the accumulation of these waste materials increases the clogging of the pipe. Of course, this is not all the work of a siphon, and the presence of this curved pipe prevents insects such as cockroaches or sewer rats from entering the building. Therefore, the existence of a siphon is very necessary. But you have to think about the blockage created inside the pipe. When clogging occurs inside the siphon, a method must be used to remove this clogging. There are various methods to clear the clogging of the siphon, but the subject discussed in this article is the clearing of the clogging of the toilet siphon.
clogging of washous sewage tube
Like other sewer pipes, the sink has a siphon. Because of this, many times it is seen that the toilet drain pipe is clogged. When the toilet water rises and the toilet bowl is filled with water, one understands that the toilet pipe has been taken and one should think about it. Various attempts to unclog it do not work, and the person is forced to call the pipe opening company so that a specialist service can come to the place to unclog it. While there is no need to do this and this blockage can be easily solved.
In most cases, the sink is clogged due to the clogging of its siphon. The siphon is prone to clogging due to its strong bend inside. Entry of the smallest garbage and substances other than water into the pipe causes clogging in the siphon. If these substances are hair, soap, seed skin, tea pulp, fruit skin, food residue, etc., the possibility of constipation increases many times.
In any case, whatever is the reason for the clogging, this clogging has occurred inside the toilet siphon, and by opening the siphon and emptying it of the clogging, you can use the toilet as the first day. To do this, you must first open the screw connected to the siphon from inside the wash basin. Then he took the pipe leading to the sewer pipe out of it so that the siphon is completely free. In this case, you can take out the siphon from under the sink and start the cleaning phase.
Open the siphon and cleanse it from clogging
After taking out the siphon, it should be opened. The toilet siphon has a plastic screw, which opens the siphon bowl into two parts. The principle of tube blockage is created between these two parts. So open the said screw so that the two parts of the siphon are separated. After opening the siphons, you will definitely see garbage and sediment inside. These sediments make water unable to pass through the siphon and transfer to the sewer pipe. In this case, it can be seen that the water has come out of the siphon bowl. Clean the layers of sediment and garbage in the siphon well, and after cleaning the siphon, connect it as before. Close the screw of the siphon and make sure that the gasket is well placed in the relevant part. Because if the washer is not in place, it will cause water to leak from inside the siphon. After doing this, put the siphon in its place and screw it from inside the wash basin. Finally, insert the siphon outlet pipe into the sewer pipe and test the result. By opening the faucet, you will notice that there is no more problem in the sink and the water flows well through the siphon. You just solved your problem at home. Without having to contact the pipe opening companies at extra cost.