The reason for the accumulation of water on the floor of the refrigerator

There is a hole in the back of Jamiyeh and in the fridge. This hole has a small opening that can easily become blocked by food particles or debris. Also, the drain pipe can be blocked by water deposits. If this pipe or drain hole is blocked, the water does not enter the container and it causes the water to collect inside the fruit container and inside the refrigerator freezer. To remove the blockage of the pipe and the drain hole, you can use a thick wire and a solution of 2 glasses of water and 2 spoons of baking soda to remove the clogging of the drain pipe.

Defrosting system or defrost system or defrosting system is a system in which the ice and frost on the evaporator is detected by the sensor and melted by the element of the device. The water resulting from the melting of these molds is directed through the drain pipe (drain pipe) into the drain container which is located near the compressor. The heat produced by the compressor causes the water inside the drain container to evaporate. Therefore, in addition to the evaporation of water, the compressor is also cooled. In this cycle, the thermofuse performs the task of disconnecting and connecting the element.

Due to the proximity of the drain pipe to the freezer or problems in the defrost system, the pipe and the drain hole may freeze, and as a result, when the defrost is done, the water does not pass through the hole and the drain pipe. Water collects in the gutter and causes it to overflow into the refrigerator. You can easily unfreeze the drain pipe by using hot water.

If the drain pipe is blocked, it must be removed with a wire and with baking soda and hot water; However, the drain pipe may be damaged or punctured while doing the work, causing water to escape from the damaged area during defrosting and pour into the refrigerator. As a result, the drain pipe must be replaced.

In NoFrost refrigerators, Plastafoam is a foam cover that protects the evaporator. This foam can absorb water and since the plastofoam is placed near the evaporator, it causes the water to turn into ice or frost and when the device goes to defrost mode, the frost and ice melts on the plastofoam. . And if the drainage pipe is perforated, this water will flow into the refrigerator.

Refrigerant gas leakage can also cause water to accumulate on the floor of the refrigerator. When there is a gas leak, the temperature of the freezer will not be optimal and this will cause the device to work to cool the freezer. Working the refrigerator all the time causes thrush; As a result, when the refrigerator goes to the defrost mode, it will have to melt a large amount of ice and snow, and since the drain hole is frozen, the water in this part will overflow into the refrigerator.