Faucets take a large share of the beauty of your kitchen and bathroom decoration, and turning them on has a great impact on the cleanliness of your home. In fact, one of the reasons for the shine of any house is its faucets, because faucets greatly affect the decoration of the house and the decor, and their cleaning is very important. are placed, in addition to absorbing germs and being unhygienic, over time the faucets also lose their original beauty. In order to clean the sediment of the faucets, it is necessary to use the right materials and the correct method to avoid scratching or damaging their plating.
You must follow certain points to clean the faucets. Fortunately, cleaning and polishing faucets can be done easily with simple home methods, that's why in this article we explain the best way to clean sanitary faucets with household products so that you always have shiny faucets. Actually, cleaning faucets is not difficult. You can easily turn on the faucets of your home like the first day with some home tricks.
First of all, remember these two very important points:
- The use of ready-made and industrial sanitary detergents for energizing the faucets may change the color of the faucets over time, and if these substances are used continuously, the faucets will become cloudy.
- Sometimes people also use dishwashing wire to wash faucets. The use of dishwashing wire also creates scratches on them, destroys the coating on the faucets and causes them to become cloudy. It is better to use soft sponge sponges for this.
Types of faucet cleaning methods
Soap and water
The simplest, best, and most accessible way to clean faucets is to use a solution of soap and water, which preserves their natural color and makes the faucets sparkle. becomes Pure water alone is able to clean faucets if this washing is continuous and daily, but the use of simple detergents will give better results.
White vinegar< White vinegar is one of the natural ingredients. Vinegar and water solution is one of the best faucet cleaners and polishers. To clean faucet deposits using vinegar solution, soak a paper towel completely in vinegar and wrap it around the stain, wait 10 minutes and then wipe the stain easily with a dry paper towel. Note that due to its acidic properties, vinegar can cause the color of colored water taps and brass taps to disappear, but if you are using common colorless taps, you can safely use vinegar as a strong polish for Use it to clean the deposits left on the faucets.
Baking soda
Baking soda is one of the first choices and the most widely used materials used to clean the surface of devices such as faucets. , sink and gas stove are also used. If the parts of the faucets have deposits that cannot be cleaned with a tissue, you can use a toothbrush. Pour some baking soda on the toothbrush and rub it on the surfaces of the faucets in a circular motion, then rinse it with cold water. In addition to baking soda powder, you can also use baking soda paste to clean faucets. Mix a quarter of a cup of baking soda with some water until it becomes a paste, then apply the paste on the taps with the help of a cloth and finally wash them with water and then dry them with a towel so that no water stains remain on them. You will see that with this method your faucets will sparkle like the first day.
Lemon juice
If the deposits on the faucet are made of lime, you can use Clean the milk from a halved lemon or lemon juice. The acid in lemon easily destroys minerals. Also, you can use lemon or lemon juice on chrome, brass or copper faucets. After doing this, wash the milk or shower with cold water and dry with a clean cloth.
How to properly clean faucets based on their type
Chrome faucets
Vinegar polishes chrome faucets and disinfects them naturally. Pour vinegar into a spray bottle and spray the entire surface of the faucet. Let the vinegar spray sit for five to ten minutes. Then clean the surface of the faucets using water and a dry cloth.
Brass faucets
Vinegar is a great option. In a small bowl, mix 1 tablespoon of vinegar, 1 tablespoon of baking soda and 1 tablespoon of salt. Apply the mixture to a clean cloth and gently move it over the surface of the faucet. Then, at the end, dry the faucets with a clean cloth, and observe the shine on it. Use it, because the soda makes the copper faucets clean and shiny. Fill the spray bottle with soda, then spray the faucet surfaces. Allow the soda particles to remain on the faucets for a few minutes, then clean the faucets with a relatively damp cloth.
Golden faucets
Use it to clean gold faucets so that it does not damage the plating and does not cause the faucet to turn black.
• Always clean your faucets daily using a cloth or towel.
• If your faucets are a little old, It may take more time to clean and shine. For this purpose, you can use vinegar, salt or baking soda. First apply some of this material on a clean cloth, then spread it over the surfaces of the faucets and finally rinse the faucets.
• Gold faucets may react to some commercial cleaners, because some of these cleaners contain There are harmful chemicals that destroy golden faucets. To be sure, you can use a special spray for golden faucets. Apply a sufficient amount of special spray on the faucet and let it remain for 10 to 20 minutes. Then carefully rinse the surfaces and dry with a clean cloth. Always wear gloves when using these cleaners.