✔️ Engine Grader
A motor grader is a construction machine with a long blade that is used to create a smooth surface during the grading process. Although the first models were pulled behind horses or other motorized equipment, most modern graders have a single engine, so they are technically incorrectly known as "motor graders."
Normal models have three axles, with the engine and cabin on top of the rear axles at one end of the car, and the third axle at the front end of the car, with the blade in between. Most motor graders drive the rear axles simultaneously, but some also add a front wheel motor to improve grading capability. Many graders also have optional attachments for the back of the machine, which can be rippers, scarifiers, blades or compactors.
✔️ Road roller
A road roller (sometimes called a compactor roller or just a roller) is a compression-type engineering device that is used to compress soil, gravel, concrete or asphalt in the construction of roads and foundations. Similar rollers are also used in landfills or agriculture.
Road rollers, regardless of the method of propulsion, are often referred to as steam machines. Road rollers use the weight of the vehicle to compress the rolling surface (static) or use a mechanical advantage (vibration). The initial compaction of the bed in a road project is done using a padfoot drum roller, which achieves a higher compaction density due to its lower surface area.
On large freeways, a four-wheel compactor with a padfoot drum and a blade, such as the Caterpillar 815/825 series machine, is used to spread bulk materials due to its weight, speed, and strong compression force. On regional roads, a small single drum machine may be used.

✔️ Asphalt Mixing Factory
Asphalt mixing plant is another important road construction equipment. If this project is big, the asphalt mixing plant is located at the road construction site. Hot mix asphalt material for pavement is usually a mixture of various graded, high quality aggregates that are heated and mixed in measured quantities with liquid bitumen to produce hot mix asphalt.
Asphalt is a paving material made from crushed stones and bitumen. Apart from the relative amounts and types of recycled asphalt pavements and paving stones that are used to produce hot mix asphalt, the characteristics of hot mix asphalt are determined according to the amount and grade of bitumen used when making asphalt.
Production of hot mix asphalt requires drying and heating of aggregates. until the bitumen is easily covered. The drying process consists of drying the aggregates in a rotating drum dryer, slightly inclined to be equipped with a burner. Aggregate is introduced at the higher end of the drum. The inner space of the drum is equipped with different types of flights, which help to heat the aggregates properly and also help to cover it properly with bitumen.
✔️ Forklifts
Forklift truck (also called lift truck, jitney, forklift, fork lift, and forklift truck) is a powered industrial truck used to lift and move materials over short distances. Forklifts are classified for loads with a specified maximum weight and a specified center of gravity. An important aspect of forklift operation is that it must have rear wheel steering.
Although this increases maneuverability in complex cornering situations, it differs from the traditional driver experience with other wheeled vehicles. While there is steering, since there is no caster function, the use of steering force is necessary to maintain a constant speed of rotation.
Another important feature of the forklift is its instability. The forklift truck and the load must be considered as a unit that has a center of gravity that alternates with each movement of the load. A forklift should never negotiate a raised load at high speed, where centrifugal and gravity forces may combine to cause a catastrophic accident. Forklifts are designed with load limits for forks that Raising the fork and lowering the load is reduced (for example, when a load is not placed against the "L" fork).

✔️ Reptile shovel
A crawler excavator is a tracked vehicle designed to excavate or grade, or move earth and large objects, and is classified by how it moves. Different types of excavators include wheeled, walker, towed and rail excavators. These crawlers are related to the tracked tanks that are widely used by armies, they move on the same rotating wheel system, but they also have the ability to dig, pick up and carry excavated materials.
Crawler excavators are widely used in construction work, such as digging trenches, holes and foundations, as well as for material handling, earth moving, demolition and excavation, dredging, etc.

✔️ Moving crane
✔️ Wheel loader
Wheel loaders are four-wheeled earthmoving machines primarily used for loading loose materials with a front-mounted bucket. The lifter assembly raises and lowers the bucket. While the mobility and large bucket, the wheel loader produces high cycle time.
The construction of wheel loaders is an added advantage. The articulated structure of the machine enables it to have higher turning power compared to other wheeled and crawler drilling equipment with rigid chassis. These machines are divided into two types: pedestrian and tire installation.



