🔰 🔰 Vertical Ceiling Jack 🔰
In order to receive the load values of the plates, they use this ceiling jack model. By using vertical bracing jack, the beginning and end part will be completely fixed. During concreting, the building jack must bear the load. It can be used in concrete roofs and roof jack framing. For heights that are more than five and a half meters, it is not possible to use a ceiling jack.
🔰 Metal Ceiling Jack 🔰
If the surface format is vertical, you will need jacks that can rotate horizontally. This model of ceiling jack is very similar to vertical ceiling jack. But it has the ability to rotate in the upper and lower parts.
🔰 🔰 Dubbed Ceiling Jack 🔰
This type of jack is used behind the walls. The use of double bracing ceiling jack is to bear lateral load and verticalize the mold. If two parts are considered for it, the short part called the jack is towards the bottom of the columns or the wall molds and the second part is the long jack, it is placed on the upper part of the mold and diagonally.
🔰 Jack T -shaped
To implement concrete ceilings and block beams, the use of T-shaped ceiling jacks will be suitable. The T-shaped part is the driver and can be rotated in various angles. The T-shaped jack has the advantage that if needed, the T-shaped part can be connected to the pipe head, and when it is not needed, you can remove it and use the normal jack. To restrain the load of concrete roofs, using this model of jacks is ideal and its operation is simple.
