One of the most well-known moisture insulators used in many structures today is oxidized bitumen isogam or BOF, which is very widely used. Izogam waterproofing has a very light weight, and due to its flexibility and high durability, it has attracted the attention of many manufacturers.
Isogams have different types based on the number of layers, the type of material used in them, and also based on the type of application. The ingredients of Izogams are industrial bitumen, talc powder, polyethylene film, needle polyester, glass wool, polymer materials, as well as bandages and adhesives, and these insulators are not subject to decay and brittleness and can withstand temperatures of 40 degrees below zero and 130 degrees. resist above zero and protect their bottom surface.
✔️ Oxid bitumen isogam and its varieties

✔️ Oxid bitumen isogam
Simple two-layer oxidized bitumen isogham is very useful when the coating is used on the insulation that is installed. span>
✔️ Aluminum foil isogam with aluminum foil coating
Isogam 2 layers of oxidized bitumen with aluminum foil cover is used when the cover is not used after installing the insulation. The aluminum foil used in this type of Isogam, in addition to reflecting the sun's UV rays and also reducing heat absorption on the surface, has a beautiful appearance and, in addition to roofs, it can be used in the walls of buildings, swimming pools, kitchens, toilets, etc. The building is also used.
✔️ Applying bitumen or bof
This type of waterproofing can be installed on stone, metal, brick and concrete, and among its applications, it can be used in He mentioned the insulation of the swimming pool, toilets and bathrooms, building foundation, walls and roof, pipe covering, paint and all the different parts of the building.
✔️ Benefits of using bitumen isogam
⚫️ Oxidized bitumen isogam is a very high quality isogam and this product has an insurance policy for 5 years.
⚫️ In this isogam, very high quality raw materials are used in compliance with all standards
The bitumen used in this product is refined petroleum bitumen and no waste or recycled products are used in its production.
This insulation can be used on all types of surfaces such as brick, concrete, stone and metal surfaces.
⚫️ The lifespan of oxidized bitumen isogams is very high and is estimated at around 15 years
⚫️ The price of each roll of this isogam is much more affordable and suitable than other moisture insulation
Oxid bitumen isogam maintenance.
When storing these isogams inside warehouses, the rolls of this insulation must be arranged on a flat surface and be upright and vertical.
Also, if you intend to store this isogam in the open area, you should know that under no circumstances should the oxidized bitumen isogam be exposed to direct sunlight.
During the installation of oxidized isogam on different structures, all safety equipment must be used
Before installing oxidized bitumen isogam or BOF, make sure that the surface of the structure is dry. Because if the surface has moisture, after the application, the moisture will escape in the form of steam and reduce the quality of the installation
After installing the oxidized bitumen isogam, to continue the insulation work, the insulation surface must be covered to prevent damage to the insulation

✔️ Difference of bitumen isogam and polymer isogam
⚫️ One of the differences between these 2 types of isogam is the smell of these moisture insulators during installation. Oxidized bitumen isogams emit a plastic or diesel smell during installation, and polymer isogams smell of bitumen during installation.
⚫️ The weight of oxidized bitumen and polymer isoghams is the same, but the thickness of polymer isoghams is much less compared to oxidized bitumen isoghams.
⚫️ Polymer isogham has a higher price than oxidized bitumen isogham
⚫️ Another way to recognize oxidized bitumen isogam or polymer isogam is that if you touch the surface of polymer isogam, your hand is not black and dirty at all, but if you touch oxidized isogam, your fingers will be black and oily.
⚫️ Life span and quality of polymer isoghams is much higher than oxidized bitumen isoghams
⚫️ Due to the lower thickness of polymer isoghams compared to oxidized bitumen isoghams, it will exert less pressure on the building during installation.
⚫️BOF isogams are suitable for use in tropical and temperate regions and polymer isogams are used in all weather conditions. Also, the use of polymer isogams is very high in the cold regions of the country, and it is better not to use oxidized bitumen isogams in these regions.



