Car shock absorber repair step by step

Car shock absorber repair training should be done in principle and step by step. In order to properly learn the mechanics of a car, you need to be familiar with all its parts. In learning how to repair a car's shock absorber, you must first park the car in a suitable and flat place and apply the handbrake. Then lift the desired wheel and keep it under it with a safe jack. Now, using a special wrench, open the screws holding the shock absorber and remove it from its place. At this stage, you should carefully check whether the spring is broken or not. If the spring is healthy, you can clean it and reinstall it. Otherwise, you should get a new spring and replace it with the old one. To install a new spring, first grease its contact surface with the chassis and connections. Then put the spring in its place and tighten the screws slowly and crosswise. Finally, after lowering the jack, check the height of the car from all four sides and make sure it is evenly adjusted. By observing the safety tips and sufficient accuracy, you can proceed with the car shock absorber repair tutorial.

Leave a comment or ask a question about Training, repair and sale of the shock absorbers of the porch.