Why is the built-in plumbing of air conditioner and split duct important?
- Preserving the beauty of interior and exterior architecture: No pipes or wires are visible on the work and everything is hidden inside the wall.
- Protection of copper pipes: Pipes are protected against direct sunlight, impact and decay caused by the extreme humidity of Rasht.
- Reduction of system depreciation: With proper insulation and basic routing, energy consumption efficiency Split duct or air conditioner increases.
Factors affecting the cost and price of gas air conditioner and split duct piping in Rasht
1. The size and length of the copper pipe used
2. Size and thickness of copper pipe
The capacity of air conditioner or split duct (for example 12000, 24000, 36000 or higher) directly affects the size of copper pipes (including liquid and gas return pipe). The higher the capacity of the device, the larger the diameter of the copper pipes and the purchase price of each meter of copper pipes increases. Refrigeration and Refrigeration of Chillers always uses high-quality pipes with standard thickness so that they do not deform or break due to bending.
3. Quality and brand of consumables
The use of copper pipes of reputable market brands, the quality of thermal insulation (such as elastomeric insulation compared to ordinary foam insulation), the material of the drain hose and the quality of the electrical cables used, all affect the price of the built-in air conditioner and split duct piping in Rasht. Buying cheap material may reduce the costs at first, but in the future, it will impose heavy costs of destroying the wall.
4. The amount of destruction and grooves of the walls
In renovation projects or buildings that have finished stiffening, there is a need to groove the concrete or brick to insert the pipes into the wall. The cost of the tools, the difficulty of the work and the time-consuming nature of this process will be added to the cost of the plumbing.
5. The difficulty of the work and the height of the installation site
If the passage of pipes requires scaffolding, working at height, drilling holes in thick concrete walls or using special equipment, the technician's salary will increase. The technical team of Sarmasazan in Rasht, being equipped with advanced tools and trained staff, executes even the most difficult piping routes with safety and current standards.
Golden standards in the implementation of built-in plumbing for air conditioners and split ducts
If you don't want the money you pay for plumbing to be wasted, you need to make sure the technician meets the following standards:
- Using separate primer and insulation: Each of the copper pipes must be insulated separately. Sticking the pipes without separate insulation causes negative heat exchange and a sharp decrease in the efficiency of the device.
- Precise slope of the drain pipe: The water resulting from air humidity should be directed to the sewer or outlet without any obstacles. In the Sharji climate of Rasht, if the slope of the drain pipe is low, water will leak into the residential unit and damage the walls.
- Basic bending with special tools: Copper pipes are very sensitive. Bending manually without tools causes the pipe to split or break inside the wall, which burns the compressor of the air conditioner or the split duct.
- Closing the two ends of the pipes: Until the final installation of the device, the ends of the copper pipes must be completely welded or blinded so that air moisture, dust and insects do not enter the refrigeration system. Moisture is the number one enemy of the refrigerant gas.
- Leakage test with nitrogen gas: After the work is completed, the pipes should be pressurized with nitrogen gas and a pressure gauge should be installed on them to determine whether the pipes are punctured or not during the construction period.
Experienced technicians of air conditioning and refrigeration carry out all these steps with high obsession and by providing a written guarantee for your projects in Rasht.
Why entrust our built-in plumbing services to "Sermasazan"?
The ventilation service market in Gilan is full of intermediaries and non-specialists. But why air conditioning and refrigeration is the first choice of professional builders in Rasht?
- Bright expertise and experience: Our special focus is on duct split systems and new generation air conditioners.
- Transparency in announcing costs: Before starting work, we provide the client with an accurate pre-invoice of materials and wages so that there are no hidden costs. We do not have unhealthy competition. Thick copper pipes and standard elastomeric insulation guarantee the longevity of your project.
- Commitment and support in Rasht: After the completion of the built-in piping, we are by your side to carry out the installation, commissioning, gas charging and periodical services of your building's air conditioning system with the best quality.
Conclusion and ways of communication
Investing in quality built-in plumbing insures the health of your air conditioner and split duct. Paying a fair and reasonable fee to an expert team will save you from the staggering costs of wall demolition and subsequent repairs.
If you are building or renovating your building in Rasht and its suburbs, contact Coolzazan Air Conditioning and Refrigeration Group for detailed inquiries on how to calculate costs and implement the project. Our experts are ready to provide advice, visit the project and submit a detailed pre-invoice to you, dear employers. Experience superior quality in ventilation and refrigeration services with chillers.
