مان Range
First, steel ingots are cut and cut in various dimensions according to the customer's needs.
Important bullion in the furnace
In the heating stage, the steel is reddened and heated in the furnace, and for this purpose, the arc-shaped sphere is turned on to reach the heat. Then, after cutting, the ingot pieces are poured into the furnace and heated in the furnace through gas fuel.
مان Lock Press
At this stage of the pipe coning process, they pierce the billet.
این Running and forming a bullion
At this stage, they give the correct shape to the steel ingot and for this purpose, they use the elongator machine, which turns the steel ingot into a solid ball.
ان Semba
After shaping the billet, a 12-meter-sized ball is thrown inside the billet at high speed. Then, if the pipe is irregular, they bend and straighten it.
ان Semba's freezing
Sembe is shot in the barrel and separated from the barrel.
اری Spherical stage
The beginning and end of the tube are out of the sharpening state and become spherical.
اری Stretch
This step is done with the aim of giving the pipe a suitable shape according to the customer's order. Therefore, they put the pipe under tension up to 24 meters.
این Correction
Due to the fact that in the previous steps for conic work, the pipes were subjected to direct and indirect heat, their temperature should be lowered. Therefore, they use cooling for cooling.
Size
Pipes are cut according to the dimensions required by the customer.
این Teaching
Then the pipes are tested in a laboratory inside the factory and through the computer, the pipes are tested and the waste is thrown away.
اری Correct work
Conic is used in welding with the aim of facilitating the welding process. In the conic stage of the pipe, both its end and beginning ends are smoothed through the conic device.
Polishing
In order to prevent rotting and give the pipe an anti-rust capability, some oil is applied on the surface of the pipe so that it does not get damaged over time.
Mannisan pipeline
Tubes produced through conic services are packed hexagonally. They tie it with special belts and send it to the warehouse or car for loading.