What is wall post?

Coils with a certain length, which are made up of two components, beams and columns, and are used in construction, are called wall posts; And they are very important in the integrity of the building skeleton and walls. Wall posts are used to separate the walls from the frame of the structure and implement the walls in an integrated manner. The major part of this product is related to the rebar, and therefore knowing the price of the rebar and the price changes of this steel product plays a very important role in using the wall post or replacing it with the bed rebar. Wallpaper literally means support and building engineers use it to separate the wall from the structure. To separate the wall from the frame of the structure by 5.2 cm, the movement of the walls can be controlled during an earthquake.

Wallpaper is divided into two categories in terms of appearance: Vertical or vertical post wall This type of wallpaper is like a beam or a column, and it is necessary to implement it on walls with a length of more than 5 meters, and also when the length of the walls is 40 times its thickness, vertical wallpaper is implemented. Horizontal post wall This type of wallpaper is executed by connecting two vertical or frame wallpaper and it is necessary to have a horizontal wallpaper in walls with a height of 3.5 meters. The implementation of horizontal wallpaper will cause the wall to clash with the structure's skeleton and thus increase the strength of the wall. When the walls are separated from the structure's skeleton and integrated, the whole structure is actually sewn together, and this increases the structure's resistance to lateral loads, and the possibility of the structure's failure is much less.

1. Implementation of the belt around the column 2. Retaining the wall by installing rebar inside the adjacent columns 3. Execution of wall post with corner bolt anchor 4. Connecting the wall to the column with rebar 5. Retaining the wall through the installation of rebar inside the floor 6. Implementation of wallpaper for Janpanah or Janpanah wallpaper 7. Blocking the wall to the shear walls by passing the rebar through the holes of the molds

1. At the beginning of the work, the welder starts to build it using the double angle 6 and pass according to the executive plans. 2. After the wall posts are made, they install and weld them in the desired places. 3. After installing them, they start building the walls, and if there is a big break in the path of the wall that increases the possibility of error, they use a surveyor to implement the broken points of the wall.

Wall post is used to protect the structure and make it resistant to natural factors such as earthquakes and wind. Engaging the skeleton of the building with the wall will maintain the balance of the wall multiple times and will make the structure more resistant to other forces. This issue causes the wall to act as a unit against the incoming forces and show high resistance.