Fiberglass mesh is a powerful and efficient material for repairing all kinds of cracks on concrete, cement, plaster, stone, etc. surfaces. Crack arrester fiberglass mesh, by being placed on the cracked surface, with high strength and tensile strength, restrains the crack in place and prevents it from spreading or reoccurring. Fiberglass mesh for cracking along with gypsum or cement plaster used in crack repair, finally creates a smooth and integrated surface. In the crack repair using fiberglass mesh, all the ways of penetration of materials and destructive factors such as water, etc. into the structure are blocked. Therefore, the fiberglass mesh, at the same time as the repair, secures the structure against possible risks and damages caused by the penetration of destructive factors into the structure through the penetration paths created by the crack. To repair a crack with fiberglass mesh, it is enough to cut the fiberglass mesh in the required dimensions after preparing and cleaning the surface from contamination such as paint, plaster, dust, oil, etc. and using gypsum or cement plaster. Install in the desired location. After the plaster is set, the process of repairing the crack with fiberglass mesh is finished and the surface can be used.
how is building stones using fiberglass lace?
The stone facade of the building is one of the materials exposed to environmental damage. Because throughout its useful life, it must withstand temperature changes, snow, rain, etc. many times. In addition, the good adhesion of the facade stone to the back mortar and ensuring the engagement of the two together is an important principle in the implementation of the facade of the building. Because if the facade stone is not installed well, it may be separated from the back mortar and thrown towards the ground, which can be very dangerous in addition to damaging the facade. Fiberglass mesh is an effective and all-round reinforcement for all types of facade stones. The mesh behind the stone provides the adhesion of the stone to the back mortar and ensures its engagement. In addition, it also prevents it from breaking and cracking. The facade reinforced with fiberglass mesh provides high resistance against moisture penetration, expansion and contractions caused by temperature changes, alkaline and chemical attacks, melting and freezing cycles, etc.
What are the benefits of using fiberglass mesh in cementing and plastering?
Reinforcement of plastering and cementing with fiberglass mesh creates uniform, smooth and long-lasting plaster or cement surfaces. Plaster or cement surfaces reinforced with fiberglass mesh will be safe from any surface damage, including cracks, especially cracks caused by drying. Fiberglass mesh in plastering or cementing ensures the stability of the mortar and keeps it well in place. Fiberglass net or mesh in plaster and cement operations, blocks almost all the pores on the surface and eventually leads to the emergence of an impermeable surface with high resistance to moisture, heat and other destructive environmental factors. On a plaster or cement surface equipped with a fiberglass mesh under the plaster, the maintenance period is greatly reduced in the long term. The use of fiberglass mesh in plaster or cement walls creates a suitable substrate for painting.