One of the categories of Iran radiator package is the category based on the type of converter in the package. Among the most important models of Iran Radiator package, we can mention Iran Radiator L and K, which has a digital fault finding display, and the L model has a larger expansion source than other models. Iran radiators are divided into 2 general categories:
🔰 Single Package 🔰
Single converter packages are marked with the letter B
In the single converter package (BI THERMIC) Iran Radiator, one converter is responsible for the simultaneous production of heating water and hot water for consumption.
In the single converter package The production of hot water for consumption is done in the exchanger that is on the fire, so the use of this type of package is not recommended in areas where the water hardness is high. This type of package is recommended for apartments below 100 meters.
B series models of Iran Radiator wall packages use a single heat exchanger system and reduce the final cost of purchasing the device, except that single exchanger models have a pump. Less, less depreciation.
🔰 Package Two Converter 🔰
Packages with two converters (MONO THERMIK) are identified by the letters M, E and L.
As it is said, in the double converter packages, two converters are used, one for the production of heating spa and the other for the production of consumer heat.
The exchanger used to produce the heating spa is directly on the flame and the secondary plate exchanger which is used to produce the hot water is heated by the hot water and passing through the cold water wall.
The reason for the lack of flame in this exchanger is that sedimentation inside it is done much later than single exchanger packages.
The main heat exchanger of heating water is called (GAS WATER EXCHANGER) and the plate heat exchanger of hot water is called (WATER HEAT EXCHANGER).
The main heat exchanger provides the hot water required for heating the environment and the secondary heat exchanger provides only the hot water consumed by the building.
In this system, the pump is responsible for circulating the heating water inside the pipes of the building as well as circulating through one of the walls of the plate exchanger.
br> The pressure of the hot water used is the same as the pressure of the municipal piping system.
L series models of Iran Radiator package include 36000 L36FF, 24000 L24FF, 24000 L24CF, 28000 L28FF and 28000 L28CF models, respectively.
As mentioned before, L and K series models have They are a larger expansion source and have a digital diagnostic display. All M and K series models have two heat exchangers.
🔰🔰 Difference of Single Wall Package and Two Converter 🔰🔰
Their most important difference is in the number of package repositories. In the single converter type, hot water pipes and heaters both pass through the same tank. However, in the package type of two exchangers, the hot water consumed passes through the secondary exchanger and the hot water of the radiators passes through the main exchanger, in this case, the thermal pressure is divided into two tanks. In addition to the hot water consumption, the pipe connection structure is also one of the things that can be mentioned as the difference between the single exchanger wall package and the double exchanger wall package. The single converter package has 4 connections, 2 of which are one-second connections and the other 2 connections are three-quarters. One-half connections are used for drinking water and three-quarter connections are used for heating water (radiators). But in the double-converter package, the main converter has two connections of the three-quarter type, and the secondary converter is responsible for heating the consumed water.
