🟧 System of controller and computer system
The brain of the wood rotary CNC is the controller system and the computer system, where all the control and design programs take place in this section. The controller and computer system provides the operation of the machine and engines to the operator, in a way it divides the tasks with the operator. Most of the designs that are going to be given to the machine are prepared in a digital format such as DXF design and stored in the machine's memory. In this part, the operator uses CAM software to convert the designed images into a two-dimensional or three-dimensional digital image with G-code format. All these processes have been converted into a digital command in the controller system and computerized CNC rotary wood system, which is executed by mechanical tools.
🟧 Spindle
The spindle in a wood rotary machine works like a manual router. The task of the spindle is to rotate cutting tools such as drills and drills, which are sold in the market based on horsepower or watts. The spindle in wood rotary CNC provides different speeds in carrying out the commands of the controller system. The spindle in the wood rotary CNC will set the speed from **** to ***** rpm for cutting all kinds of plastic, wood and soft materials, but it will provide the speed from **** to ***** for cutting metals. One thing you should know is that the routers available in CNC rotary wood can also cut all kinds of metals, but their use is limited to metals such as aluminum. The spindle is controlled by the wood rotary CNC controller system and their speed is adjusted based on the material and the amount of input current to the device. Also, nowadays, in the new examples of inlaid CNC, it is tried to use motion and touch sensors to increase the safety of the work.
🟧 Cutting
The cutting table is one of the main parts of the CNC rotary wood machine, which has the task of maintaining the workpiece during the cutting operation. Cutting tables are designed and produced in different types, the most common are CNC rotary wood cutting tables, flat tables, or T-slot tables, which have a T-shaped groove that increases the safety of the work and allows the work piece to be placed on the table. In some rotary CNC machines, the wood cutting table is fixed and in others it is mobile.
🟧 Linear axis system
The linear axis system is another part of the wood rotary CNC, which is installed horizontally on the table and is responsible for holding and moving the spindle. In the manual wood rotary machine, the spindle is connected to the linear axis system by tools and provides the basis for the movement of the spindle in the X and Y directions, which will cause vertical cuts by moving the table of the wood rotary CNC machine. But in the advanced models of CNC wood rotary machine, the linear axis system can perform all horizontal and vertical movements. In advanced mode, 4, 6, 8, 10, 12, 16 and 16-head systems are used in wood rotary cnc, which can simultaneously perform different vertical and horizontal cuts.