Kenaf profile structures are made of galvanized steel sheets. As mentioned, these structures are made by cold rolling technology with a roll forming machine. This structure is prepared in two ways, master and runner sections.
The master structures are installed vertically from each other at average distances of 30, 40, 60 cm and are used as the substructure of the panels. The depth of this structure is 50, 70, 75, 100 mm. Another name for that structure is c, because it is c-shaped. This structure is produced in two types, DIN and NF. Runner: The runner is the horizontal part of the steel frame in the structure of dry walls. This structure is U-shaped, that's why its other name is U structure. The use of this structure is in the ceiling and floor and the conductor of the master structure in the wall as well as around the opening. The runner structure of this profile is available in two types, DIN and NF. Also, the master and runner profiles of Kenaf can be easily installed. In addition to these two structures, which are the main factors of underlaying the Kenaf profile, there are other important components to improve the performance of the wall.
🔸 corner protection structure or corner bead of Kenaf profile 🔸
This structure is used to install the external corners of the profile, which has a significant effect in creating triangular and uniform edges. The main role of the corner protection structure is to prevent damage from possible impacts.
Edge structure with G-Bide profile of Kenafi 🔸
From this profile structure for uniformly designed decorations. And it is used smoothly. One of the advantages of this structure is protection against the impact of free edges.
🔸 Interruption seam structure of Kenaf profile 🔸
This Kenaf profile structure is used as a cover for seams, because continuous walls with a long length need to create an interruption seam. So far, we talked about the galvanized substructure, including the components of the Kenaf profile, now we are going to examine another of these important components, including gypsum-coated plates - gypsum panel. These profile plates include a cream-colored coating with The blue stamp of Kenaf is on the back. The use of these plates is general and they are produced in thicknesses of 5, 6, 9, 12.5 and 15 mm. Also, these plates are used for the wall and roof of the Kenaf profile. Simple plaster and special additives are made. The specifications of these pages are in the form of a green cover with a blue Knauf stamp on the back. One of the features of the resistant panel is its resistance to moisture, and these panels are generally used in humid places.
🔸 FR resistant panel of Kenaf profile against fire 🔸
As the name of these pages suggests, the FR resistant panel is made of fire resistant compounds and fibers that are resistant to fire. be Covering metal columns and beams of Kenaf profile is one of the advantages of these panels and plates. The profile is used in places where, in addition to humidity, there is a possibility of fire. Installation ducts are among the advantages of these panels.
