Behzi

Introduction of elevator parts

study time 1 minute

433 views

Introduction of elevator parts
Advertisement
image

Ad link

One of the most important and necessary parts in towers and apartments is the elevator. A tool without which going through the stairs and going up and down would become a crisis. Elevators that are used in buildings or anywhere else, with different applications, are made up of parts that In this article, we are going to introduce its various components.

️ ️ Elevator motor:

Here we refer to the most important and sensitive part of the elevator, without which it is not possible for the elevator to move and move, and in fact it provides the driving force necessary for the movement of the elevator, which is the elevator motor. Elevator motors Like other parts used in the elevator, it has different models and types, among which gearbox and gearless motors are the best types. The elevator motor has the task of moving the elevator cabin and the weight frame, which is done by the towing wires and according to the command of the control panel.

️ ️ Elevator Cabin:

is actually the main part of the lift cabin. The room-shaped elevator cabin is designed to move and place cargo or passengers. Regarding the interior design of the elevator cabin, it should be said that this work is done according to taste, and materials such as steel, MDF or a combination of both can be used to make the cabin, or any other suitable material. according to the taste and choice of the consumer. Elevator cabins are built in different heights and capacities depending on the capacity and efficiency they are supposed to have and can be cabins for moving people, cargo, food, cars, etc.

معرفی قطعات آسانسور

️ ️ Elevator rail:

The elevator rail is a part of the elevator that is used to maintain the path of the cabin and also prevents horizontal fluctuations when the passenger gets inside the elevator. Basically, the elevator cabin is supported by shoes that are completely dependent on weight and use. It can be sliding or roller type, it moves between the elevator rails and causes movement between floors. Another main task of the elevator rail is to hold the elevator during the operation of the safety mechanism.

️ ️ Elevator Floor Door:

Another component of the elevator that is visible to us and we deal with it is the door of the elevator floor. The door of the elevator floor is designed and made in different types and shapes, which you have probably seen until today. One of the main reasons for designing and placing the door of the elevator floor is safety, the entry and exit of passengers into the elevator cabin. It is a very important issue. Today, according to the design of the elevator and according to the application it is supposed to have, different elevator floor doors are designed that exist in different widths and heights. If we want to go to the most common type of elevator door We can mention the following:

معرفی قطعات آسانسور

  • 1. Manual door (which is also known as a hinge)
  • 2. Telescopic door (with retractable side door model) 3. Another type of telescopic door (opening from the middle).

Of course, as we said, the design of the doors of the elevator floors is very diverse, and depending on the use, you can also use accordion, bus or guillotine doors. .

️ ️ ️

One of the most important parts of the elevator is the control panel, which can be considered as the processing center for all the commands and operations of the elevator. It is interesting to know that all the commands for the elevator are like moving between floors. and keeping and... is sent to the elevator motor through the control circuit, and the operation of the motor and all electronic parts depends on the commands of the control panel used in the elevator. Among the different steering boards, two-speed and single-speed steering boards can be mentioned, which are the best types.

معرفی قطعات آسانسور

️ ️ ️ Parachot or Governer:

You probably know that all elevators have a part called a safety brake, which is also known as a parachute. This safety brake has sections called jaws, which can prevent the cabin from moving on the rail and prevent the elevator from moving.

️ ️

For everyone who has heard about the fall of the elevator, in this case it must be said that if for any reason the elevator does not stop at the lowest station and is falling towards the bottom of the well, other safety systems cannot either. show their own performance, so after traveling a few centimeters, it will collide with a piece called a buffer. In fact, the main function of the buffer is to reduce the intensity of the impact on the cabin. Buffers are also made in different types, among which polyurethane and hydraulic buffers can be mentioned as examples of the best.

Conclusion:

In this article, we tried to familiarize you with the elevator and its main components and the application of each of them, but remember this issue so that you can use it like any other device in the long term. use for a longer time, it is necessary to take special care to keep it healthier and better, for example, it is better not to use the elevator to move the load, because it will cause pressure on it and as a result, it will be damaged. We hope that this article is for You have found it useful.

Content support expert - code 03 - extension 227

Content support expert - code 03 - extension 227

Post Author

11092Post
View Page

I am a content support expert with code 03 in Behazi. My job is to manage, upload and optimize business content. To contact me, you can call 01391001011 extension 227.

Your reviews and experiences

What do you think?

Help us create better content by submitting your rating.

Similar posts