Carpet washing steps in a carpet cleaner

1. The first stage of carpet washing in a carpet washer is dust removal, in this stage the dirt from the carpets is removed, which has a device called a dust collector. This device has a lot of power. The clock rotates so that there is no dust in it or on it.

2. The second step is to wash the carpet with detergents. In this step, the carpets are spread evenly next to each other on a flat surface and water is sprayed on them with great pressure and speed. After the carpets are completely and uniformly wet, detergent is poured on them, and then the washing machines are used and the carpets are moved in an orderly and regular manner.

3. The third stage of washing the carpet is draining the carpet. At this stage, after washing the carpet with detergents, they are rinsed with hoses that are water-dispersing showers. In fact, at this stage, the detergents must be completely removed from the carpet. Rinsing takes place in two stages.

4. The fourth stage of washing the carpet is dewatering the carpet, which is used after rinsing. They roll the carpets and put them in the sink; The water trap is a cylindrical device that has a metal wall and the carpet is placed on it. And then this device rotates with its power at a speed and in a circular motion, and the water inside the carpets collects on the sides and is thrown out from the wall behind the carpets.

5. The final step of washing the carpet is drying the carpet; Some carpet cleaners have a heating system and some dry it under the sun. Carpet cleaners equipped with a hot house use a large heating device in the middle, then hang the carpets from the scaffolding to dry quickly. It is for this reason that some carpet cleaners deliver the carpets quickly and the carpets do not smell and have better quality.

Carpet washing steps in a carpet cleaner

Content support expert - code 06 - extension 132

نظرات و تجربیات شما

دیدگاه شما چیست؟