What is the use of iron valve?
Correct and uniform air flow distribution throughout the room is one of the most important points in the air conditioning process. For this reason, it is very important to maintain the same air temperature in all available space. The main use of the iron wall valve is to direct the air and block its flow in the space. Also, this valve is used for correct and uniform air transfer of water coolers and other air-generating devices. This device is the best and most used in directing the air of water coolers for domestic use.
air conditioning valve It is used in homes, offices and other places that need healthy air flow. Another feature that these valves have is air return. With this feature, the air outside the environment can be turned into pleasant air in the entire desired space. Valves that have this feature can be installed and used in the lower layers of the wall or on the floor. The design of the built-in dampers in this device is such that it can simultaneously direct and open and close the air flow. The vertical vanes on this product are responsible for guiding and adjusting the air in the left and right directions; Also, the horizontal vanes control the top and bottom. This product has the ability to move 76% when directing the air and projecting the wind up to 20 meters. The frame around the valve is usually made in 3 cm. In some cases, in order to be more beautiful and comply with the technical principles, a 5 cm sheet or profile is used for the frame around the valve. The shape of the iron wall valve can be in two forms: a flat square and an arched square. This valve is designed in such a way that it can be directly connected to the branching opening of the air channel which is tangent to the wall.
Damper is an important part of the process in places where this device is used as an air valve. This means that if the main source of air conditioning, such as a water cooler, provides ventilation to several wall vents, a separate damper is needed to regulate the air in each of them. These dampers can be placed directly at the entrance of a pipe that is tangent to the wall. Types of iron valves: These valves are installed on the roof or wall of the building to let in fresh and suitable air. Iron wall valves: They have two different types, each of which is discussed below: Volume iron valve: This air valve, which is also known as long back valve, is one of the first generation of valves. The reason for this name is the height behind this device. Iron lever valve: This type of valve is known as short back valve due to its low depth. The structure used in the lever of this valve causes it to rarely break down and require repair. The color of these iron valves is made of electrostatic powder (furnace), which has good durability and resistance to rust and corrosion. Is. Due to its short back, this type of valve is better in terms of appearance and has a relatively lower price. The thing about these valves is that in winter, due to the lack of a cover, there may be energy loss in them. For this reason, it is better to use lids for the valves in this season or cover the valve manually.