One of the most important issues that you should pay attention to when replacing the refrigerator door rubber is, what is the type of your refrigerator door strip?
1. Screw tires
2. Press tires
steps to replace the refrigerator door bar
The first thing you should do when replacing the refrigerator door rubber is to unplug the refrigerator or freezer. Because you don't know how long it will take to replace the plastic and leaving the refrigerator door open for a long time will damage its motor.
Before replacing the rubber on the refrigerator door, unplug the refrigerator first, because the refrigerator door may remain open for a few minutes, and this causes energy loss and damage.
How to Replace the Refrigerator Tires of the screw type
If the rubber around your refrigerator door is a screw type, you need to pull the rubber up to see the screws underneath. Loosen the screws a little so that you can remove the rubber around the refrigerator door and replace it with a new one
How to replace the refrigerator tires of the refrigerator
1. To replace the press-type refrigerator door rubber, you must separate the rubber from the latches and grooves around the refrigerator door.
2. Connect the purchased rubber to the refrigerator door.
3. If there are clamps or screws around the refrigerator, you must connect the rubber around the refrigerator door and close the screws or clamps. 4. If there are no screws or clamps, you must press the rubber around the refrigerator. Then put the gasket well in the grooves so that the gasket fits around the refrigerator and on the grooves and is fixed.
