☑️ Valves constituents
In general, all building faucets are made of brass alloy or dry lead, and the only difference is in the surface finish.
Today, most manufacturers are trying to produce their products from brass alloy. Because lead corrodes after some time. This matter is not approved from the point of view of health and also the standard.
☑️ Melops of Building Valves
usually faucets consist of two parts; One is the inner and main shell of the milk and the other is the outer shell cover. Normally, manufacturers try to produce the inner shell from brass alloy, and due to the visibility of the outer shell of the valves, they are usually made of metals such as steel, bronze, silver and other items.
☑️ The most important components of valves
The parts that make up the faucets actually form the same building of the faucets. In the rest of the article, we will discuss the things that are common in all types of faucets:
☑️ Body of the Valves
The body of construction valves is their outer cover that protects its internal components from impact and other problems. As a result, this part of construction valves is of special importance.
☑️ Bonn
Another component of faucets is the bonnet, which plays the role of a cap on the valve body. Bonnet is usually screwed or welded on the body of the valve.
☑️ manual operating or acchaater
This part is located outside the body of the valve and controls the valve. The actuator may be manual, automatic or remote. It should be noted that some valves automatically control themselves from the inside and the presence of an operator in many valves is not mandatory.
☑️ Conduct
The duct is another component of faucets. This part is a barrier that is located inside the valve body and has the ability to regulate or limit the water pressure.
☑️ Settlement or Site
The seat is the inner surface of the valve body, which is fixed and is considered a connection point for the duct. For example, in the valves whose channels are linear, they are placed in a pin.
When the valve is closed, the conduit is in contact with the seat. Also, in the conduit, the rotating straps are in permanent contact with the seat.
☑️ Valve stem
The stem is a piece that controls the movement from the manual operator to the channel of the strap, and this movement can be transferred in the form of torque, linear, rotation or sometimes as a combined force.
☑️ Hub
The valve ball is one of the most important parts that is usually used for heavy cases. Usually, the valve hub is made of brass, stainless steel, satellite, etc.
☑️ Spring
In valves that do not use an operator or stem, a spring is used to move the duct. It should be noted that most safety valves use a spring to keep the water closed.
☑️ Guski
This piece is another component of valves that are used to prevent gas or fluid leakage inside industrial valves.
☑️ Selection of the right valves
Most urban water consumption is related to domestic water consumption. Also, the most effective measure to reduce the consumption and use of water correctly is the correct selection and use of appropriate faucets.
Another important thing that you should pay attention to when buying faucets is the ability to adjust the faucet water. The lever valves that are produced today, while having a beautiful appearance, have made adjusting the water pressure much easier than in the past. Lever valves are easier to open and close than old models and also reduce water consumption. These valves are easily repaired by the user in case of failure. Thus, it is recommended to buy lever valves in terms of water pressure regulation.
