Maswar wire is a type of wire that is produced by coating copper sulfate on steel wires. Due to its high resistance to corrosion, good electrical conductivity, this type of wire has many uses, such as the production of electric plugs, the production of baskets and watering cans, railway and kitchen accessories, the production of metal nets, and the production of cages for birds, poultry and domestic animals, used in industrial cables. Towing ropes are used as auxiliary - production of fittings - airport and shopping carts, various clothes hangers, flower making and other productions.
What is Maswar?
Maswar is one of the types of metal alloy that is used for various purposes due to its malleability and high flexibility. It is usually offered in the market in two forms: coiled and branched. To prevent corrosion and increase their resistance, they use copper coating on these wires. One of their important uses is making kitchen utensils and decorative items.
What is the twisted wire?
Maswar wires are usually sold in the market in the form of branches and coils with a diameter of 1 to 8 mm. Welding of metals is one of the important and special applications of maswar wire. Masawar wire is actually an iron wire that enters 2 tubs after the last stage of stretching and reaching the desired size. First, acid is washed to clean the wire and remove the contamination from its surface. After that, it enters the copper sulfate bath. If the acid washing and degreasing are not done well, black spots will be left on the surface of the coated wire in the next step, and this type of wire produced will disturb the electroplating process in various industries. .
Production stages of maswar wire
The production of maswar wire is done in different stages. In the following article, we will get acquainted with its production stages...
First stage: Degreasing and cleaning
In this stage, cleaning of maswar is done, cleaning of maswar using It is made from water, but it is accompanied by many problems. Because after cleaning the metal, it gets black spots, which is easier for the metal to rust.
The second stage: drawing and wiring
In the second stage, that is, drawing and wiring the maswar, a process is carried out by special technology and devices and causes the maswar to be wired. .
Third stage: copper sulfate
In this stage, the wire that has been created enters the copper sulfate solution, which makes a layer with a diameter of 1-2 microns be created on the wire. Fourth step: cutting In the last step, cutting, the produced wire is cut to certain dimensions according to the industries used.
Advantages of using maswar wire
Maswar wire is one of the most popular goods among all kinds of products, and this is because of its very special advantages. Among the advantages of maswar wire, we can mention the following:
high flexibility: maswar wire, due to its high flexibility, is used to produce parts that need flexibility, such as springs and cables. are used.
Resistance against pressure and tension: The very useful feature of maswar wire is that, in addition to flexibility, these wires have high resistance to pressure and tension and are used to produce parts such as wires Spring and structural reinforcements are used.
Simultaneous production of different metal wires: By using Maswar wire, different metal wires can be produced simultaneously and used in different parts. .
Usability in various industries: These wires are used in various industries, including electronics, automotive, construction, weaving, etc.
The possibility of mass production and reduction Cost: Maswar wire production is possible in mass and at high speed and this will reduce the production cost.
In general, because of these advantages, Maswar wire is used in various industries, especially It is used in the production of parts with special needs.