Now that you are familiar with the types of Izogam and you intend to install Izogam correctly and in accordance with the proper principles, be sure to remember these 5 points:
1- Pay attention to the type and quality of isogam to install isogam
The most important issue that you should consider for isogam roof and wall is the type of isogam, its quality, having It is the standard emblem and its material. Therefore, if this product is at an acceptable level in terms of quality, you can use it for years with ease and be sure of its durability.
2- pay attention to the desired surface
be sure to check the surface on which you are going to install isogam before installing isogam, because this type of insulation Moisture cannot be used in some cases, which we will discuss below:
Isogam installation on wood
Because of the nature of wood, the necessary adhesion between this surface and Isogam is often very low.
At the same time, corrosion or swelling of wood also causes the failure of this insulation. And finally it will be torn off.
Installing Isogam on ceramic
This surface or any other smooth surface like tile will not be a suitable option for installing Isogam.
It is better to install Izogam on bricks and plaster that are wounded.
Isogam installation on iron or metal
In addition to having a smooth surface, iron or other metals usually expand and contract in different weather conditions, which causes isogam to not last and peel off. It will be.
Installing isogam on isogam
If you want to do isogam on the previous isogam, it is better to cut the top layer of the old isogam or wound it before isogam The new one fits well on the surface and sticks properly.
isogaming on cement and concrete
if you can use standard and high-quality isogam on cement and concrete surfaces, you can use this insulation for years with peace of mind. take.
3- Use bitumen or asphalt under the isogam
One of the best conditions you can use for installing isogam is a bitumen surface and the use of bitumen. Because in this condition, the bitumen on the surface is integrated with the isogam bitumen and a much higher adhesion is created, hence the durability, durability and insulation are done with a higher quality.
4- Clean the desired surface well
The cleanliness of the desired surface is very important for installing Izogam.
Therefore, try to remove dust clean it from the surface and level the desired surface without any additional objects. Also, try to cover the previous layer with the new layer completely parallel, so that insulation and sealing are done completely reliably.
5- Choosing the right season to insulate with Izogam
You surely know that the best weather conditions for installing Izogam is warm weather without rain.
After Avoid using isogam on cold, rainy and snowy days, because the possibility of isogam sticking to the relevant surface is reduced and it does not last well.
