Isogam has a soft and flexible surface and may be punctured for some reason. Preventing isogham perforation is an important issue that we will discuss in this article.
Isogham perforation is expensive. Preventing holes in the waterproofing is the best way to protect it. In fact, if the isogam is punctured, depending on the size of the damage, you should remove the damaged part of the isogam and make it again.
Even if the damage is one or more small holes, it can be repaired and There is no need to change the isogam. In general, maintenance of isogam requires less cost and patience than its repair and replacement.
Why is the isogam pierced?
Izogam, as a popular waterproofing material in Iran, in addition to its many functions, may also suffer from failures, which include perforation. . The fibrous structure and the use of various types of polymers and tissues in Isogam have made it a suitable insulator against moisture penetration;
but it is still weak in terms of physical resistance against sharp or abrasive objects. The flexibility of isogam makes it impossible to use very strong physical protectors.
The most important reasons for the perforation of isogam:
- Spilling of acidic chemicals or playing on isogam
- Perforation by pulling heavy objects
- Perforation due to scratching by sharp objects
- Rapid damage of isogam due to its expiration date
Preventing isogam piercing
To prevent the waterproofing from getting punctured, you should be diligent in maintaining it and buy a high-quality isogami. The cost you spend to buy quality isogam directly affects its quality and durability. The essential tips to prevent Isogam from getting punctured are as follows: - Avoid contact with sharp, sharp or heavy objects with Isogam. If a nail or metal pushes the isogam, there is a possibility of it getting pitted. Also, as mentioned, the base of the cooler, a ladder, or even falling heavy objects with sharp corners on the isogam can puncture it and cause a leak.
- Do not use thick or spiked shoes to walk on the isogam. Creating a hole in the waterproofing by a shoe nail is a common and damaging factor for Izogam. - Avoid spilling acidic, alkaline or chemical substances on Izogam. Spilling salt ink on the isogam, if it is not removed in the first moments and minutes, it can lead to damage and holes in the isogam. - Repair the pitting of the isogam as soon as possible. Not repairing isogam damage can lead to its spread and involve more level of isogam. Also, if the failure does not spread, water and moisture will penetrate the damaged part of the isogam, making that part practically unusable.
- Be careful in maintaining the aluminum foil on the isogam. The removal of this layer causes direct contact of the underlying layers with the surface and increases the possibility of damage.
- The contact or collision of very cold or hot objects with isogam can lead to its perforation, so it should be avoided. For example, if a piece of hot coal falls on the isogam, carelessness and not noticing it may lead to a hole in the isogam.