Car spark plug wire

The spark plug wire has the important task of transferring the output power from the ignition system to the engine spark plugs. In fact, the function of the wires (in English, Spark Plug Wire) in the car is to deliver electricity from the coil in newer cars or Delco in older cars to the spark plugs. The correct performance of the combustion process in internal combustion engines depends on many factors that can have a direct impact on its quality. Car engines perform combustion by sucking in air, condensing it, and combining fuel with air to perform part of this process, but the completing part of this puzzle is the electric current that causes sparks and ultimately combustion inside the engine. /p>

The electric current required is created by the car battery, but as we mentioned before, this electric current comes from It has a low voltage, and to solve this problem, automakers use a part called a coil in the car. In fact, coils are induction coils that are placed in the car's ignition system and produce high-voltage electricity.After this high voltage current is created, it must reach the spark plugs of the car to Start the combustion process in the engine by lighting the spark plug. The spark plug wire has the important task of transferring the output power from the ignition system to the engine spark plugs. In fact, the function of the wires (in English, Spark Plug Wire) in the car is to deliver electricity from the cable in newer cars or Delco in older cars to the spark plugs.

The wires must deliver the electric current with a voltage of 12,000 volts to the spark plug with the lowest energy loss and in the fastest time so that the spark plug can perform its assigned task well. As a result of heat and vibration, the carbon in the wire may be destroyed and cause a decrease in the voltage flow between the coil and the spark plug. For better engine performance, the wire must be replaced periodically. In modern ignition systems, a coil is used instead of a spark plug wire, which is located directly on the spark plug. If one of them breaks, the car engine will not work well. Candle wires are usually made of silicone and it is durable. The car wire is connected to the coil or delco on one side; This joint is usually protected by a cap to prevent moisture from entering the joint. Ingress of water or moisture can have a negative effect on the performance of the wire. On the other hand, the wires are connected to the car's spark plugs. Since this part can be more exposed to moisture, it has been insulated more carefully. The outer material and covering of the wires are also usually made of dry plastic compounds or elastic rubbers. Inside this cover there are strands or fibers that are responsible for directing the electric current created in the coil. Also, in order to prevent the creation of magnetic current and disruption of the functioning of other parts of the car, a protective layer is stretched over the wires or fibers. Usually, a thicker layer of thin metal insulation is applied to them to prevent the electric current from going out of the wire and also to protect the wires from the heat of the motor. Wires are classified into three types, which are: wire wires, silk wires and combined wires. Each of these three categories has its own advantages and disadvantages.

Wire damage or malfunction can cause the engine to malfunction and also increase the car's fuel consumption. It is also possible that the possible leakage of gasoline in the fuel system of the car and the simultaneous leakage of electricity from the wires can cause a fire and very serious life and financial risks. Decrease in engine power, increase in engine temperature due to increased pressure on it, engine tearing and More than normal vibrations in the engine can also be a sign of wire failure. In addition, the failure of the wires to work correctly can increase the car's emissions and also cause the spark plugs to melt.If the cover of the wires is damaged, there is a possibility of electric shock when touching them. Corrosion or deterioration of wire coating can usually be identified by examining their appearance.

Since the wires are one of the important parts in the car ignition process, if you encounter the mentioned signs Above, you should check their health as soon as possible. For this purpose, you can visit any Renault after-sales service agency throughout the country. In order to distinguish the original packaging from other packaging, you should pay attention to the following points: • The words "Group Renault" and "Groupe Renault" are written on all boxes in both English and French. • The words "Genuine Parts" and "Pieces D'Origine" and "Piezas De Origen" (meaning the original piece) is also printed on all boxes. Except for these two terms, if any other terms are seen on the boxes, it means that the package is fake. Also, currently, the main spare part is available in two white packages and brown cartons.