What issues should we pay attention to when buying pen containers?

🦋 Persi works are light and the machine cannot create a pattern on a thick sheet of copper or brass. While the patterns of handwork are not completely uniform and some of its lines are crooked. It is uneven, sometimes it doesn't even have exactly the same size.

🦋 Press work is much cheaper than hand work. Consider the above. Now, if you are sure that the work is done by hand and you want to prepare a high-quality pen, make sure to consider the following issues: The cut parts of the lip must be returned. > 🦋 if the plate is decorated with peripheral strips, the place of soldering is from the bottom and from head to head and is exactly tangent to the edge of the work. As the product in question is a bowl, the tape must be completely welded in the lower part of the bowl and the lower lip should be in contact with the ground. There should be no scratches on the surface. The edges should not be uneven. The cube of the bowl and pitcher should be considered suitable. Brushed, it should have a smooth surface and the place of contact with the ground is completely flat.
🦋 If the brushed plate has a surface in full contact with the ground.
🦋 In case of plating, it should be plated uniformly. br> 🦋 If the consumable strips are not of the same gender as the work background, they will appear in a different color in plating.
🦋 The patterns used should be traditional as much as possible. It is more.
🦋During penning due to too much pressure on the pens, there should not be a hole on the surface. .
🦋 After the work is finished, the object is paid more precisely and no trace of bitumen can be seen on the surfaces.