Hoblex Block
AAC blocks, which are also called Hablex blocks, are a new generation of blocks that are used to implement the surrounding and internal walls of structures. These blocks have a different structure and, at the same time, a different implementation than traditional blocks such as brick, clay and concrete. Heblex consists of elements of silica, lime and cement along with aluminum powder. Aluminum powder expands and creates air inside the blocks. And the reason for the lightness of the blocks is that 80% of the hollow holes are created due to the use of aluminum element in it. Hablex blocks are usually available in the market in two forms. Autoclave and non-autoclave Heblex, the purchase of non-autoclave type is not recommended due to its low efficiency and poor quality. Hablex blocks have many advantages over traditional types of blocks, and the reason these blocks have attracted attention in recent years in the whole world and in our country is because of these advantages and special features.
What are the Hoblex Block Features?
🔲 have very little weight compared to traditional types of blocks.
AAC blocks have much less weight due to their different structure, they are light, and this lightness is one of the reasons for the simpler implementation of these types of walls. The more our building materials reduce the dead load of the building, the higher the safety of the structure. Hablex blocks are among these materials that help to reduce the dead load of the building. Because the walls of the structure are one of the components that increases the weight of the structure when implemented with traditional materials.
🔲 The amount of use of materials for the thinning of the Hoblex Wall is lower.
When we build walls using brick, clay or concrete blocks, after implementation, we will not have a smooth surface on the wall, and before the final carpentry, which is usually done with white plaster, an intermediate coating of plaster and soil or cement must be applied. also have Hablex walls have a much smoother surface after brickwork and eliminate the need to use an intermediate coating. This saves costs and the amount of construction materials used. And at the same time, the dead load of the building is reduced. Another point is that there is no need to use mortar between rows of blocks, which creates two major advantages. The first advantage is the saving in the use of building materials and costs, which does not allow the weight of the structure to increase. And the second advantage is preventing the creation of thermal tunnels, and the wall has a standard structure in terms of thermal and cold insulation, and thermal bridges are not created between the rows.
🔲 Hoblex Wall are a good thermal and refrigeration insulation.
After the construction, we must have a cover as thermal insulation for the surrounding walls of the structure, for example, it is necessary to use insulation such as stone wool or polyurethane to reduce thermal conductivity and increase the thermal resistance of the walls. If the surrounding walls of the building are implemented using Hablex blocks, there is no need to use other thermal insulations, because the structure of these blocks is such that they have very high thermal resistance and are a powerful thermal and cold insulation.
🔲 Fast and Simple Hoblex Wall Run
🔲 Hubblex walls are a good sound insulation.
