What are the ways to make a whiteboard?

There are different types of whiteboards and different methods should be used to make each one. In general, it is possible to make a whiteboard in the following types:

MDF whiteboard
Magnetic whiteboard
Whiteboard with Talc

Making a whiteboard with MDF

To make this whiteboard, you need the following raw materials.

White paint
Five millimeter drill Metric
two-part whiteboard resin
MDF sheet with low thickness

At first, the MDF surface must be completely sanded and smoothed. so that it can be made white. Use a catalyst to prepare the resin. Apply it with a roller on the white surface. Then you have to wait for it to dry. Your board will be ready to use. To make this board, you will need sandpaper, circular saw, pencil, magnet tape and cork. In the first step of making the big white board, prepare a galvanized sheet. Cut a piece of cork for it using a jigsaw. Use a magnet to stick it to metal surfaces. Then you need to glue the board and the galvanized sheet together. As soon as the glue dries, the board will be ready. but it will be suitable for classrooms. You will need a piece of cardboard, scissors, paper cutter, clear tape, paper and glue. Cut the cardboard to your desired dimensions. Dip one side of it completely with glue. Then use white paper on it. to stick well. In the next step, it is time to stick the Talaq. which must be completely fixed on the screen. The board will be ready. You just have to be careful to increase the thickness of the board a little so that it is easier to write on it.

Magnetic Whiteboard

To make this board, you will need sandpaper, circular saw, pencil, magnet tape and cork. In the first step, make a big whiteboard. Prepare a galvanized sheet. Cut a piece of cork for it using a jigsaw. Use a magnet to stick it to metal surfaces. Then you need to glue the board and the galvanized sheet together. Once the glue dries, the board will be ready.