In general, swimming pool facilities are very diverse based on the type of facilities requested and are not limited to a few small and fixed devices. Since the category of equipment used in swimming pool facilities is very important and is the cornerstone of any pool, we intend to introduce the important and vital components of facilities used in swimming pools in this article.
Pool facility in a hypothetical pool
For a better understanding and initial acquaintance with its facilities and equipment, it is better to take the help of a hypothetical pool that has a jacuzzi and show you the pictures of the equipment used in it. To begin with, assume that we have a pool with the following specifications:
- The capacity of 30 thousand gallons of water (about 120 cubic meters of water)
- The water of this pool is also daily In an intelligent system, the circulation and purification between the facilities and the pool is rotating. We assume that this pool has a fountain and a fountain, each of which has a separate purification system. li> to heat and raise the water temperature from pool heating system which we use including heater.
- In this pool, chemical substances are automatically analyzed and these substances are automatically injected into the pool.
- Light, lighting and also the facility control system are also automatic in our pool. >
1. Water circulation system
In the attached image below, you can see a water circulation system that consists of various equipment and parts. This system not only circulates water in the circuit, but it is also responsible for its purification. This system is also used to circulate water in the jacuzzi. In general, the pool water circulation system includes the following parts and sections:
✅pump
✅types of faucets
✅ a large purifying filter
✅and finally the pipes that are basically drawn between this system and the pool and Jacuzzi.
2. Fountains and fountains
One of the main components of the water fountains are water features and fountains. We have used a water fountain and 6 fountains in the pool under investigation and 6 fountains, 2 of which are installed in the bottom of the pool and 4 others are around the pool that pour water from outside into the pool. Each of the mentioned items alone and separately have equipment that purify their water.
1. Heating systems or heaters
Two types of heaters have been used in our swimming pool facilities. One of these heating systems is a heat pump and the other is a type of gas heater. Since heat pumps have better performance and overall performance, they are used more to increase the overall temperature of the pool. On the other hand, gas heaters are also used to increase the temperature of the water in the jacuzzi in a short period of time. Regarding gas heaters, it should be noted that the task of adjusting the amount of gas entering the heater is directly the responsibility of a regulator.
1. Automatic System Control of Pool Chemicals
This system, which is also known as (Automated-Chemical-Systems), easily measures and controls the level, concentration and amount of chlorine and pH of the pool water automatically. To achieve this goal (measurement and control of chemicals), the automatic chemical system uses three types of equipment used in swimming pool facilities. These 3 items are:
- A system that automatically measures and analyzes the amount of chemicals.
- A special chlorination device of the type saline
- and finally an acid tank that is accompanied by an injection pump.