Plumbing is one of the necessities of every building; Because water is vital to life and without it, human beings cannot last even a few hours. The water needed for living in homes is supplied through the water and sewage piping system. Various pipes are used for water and sewage piping, for which of them a series of hygiene points must be observed. In this article on the Technical Show website, we will explain important points about water and sewage plumbing, so follow us.
Benefits of Standard Plumbing
That a basic and standard water and sewage piping is done; It provides safe and comfortable drinking water for the residents of the building for many years. Of course, water piping in principle has other advantages, among which we can mention safety in pipes, saving time and energy, optimal use of various components of facilities, and preventing repair and service rework.
According to the mentioned cases, water and sewage piping should be done according to rules and principles, and the common feature is that sanitary points are observed in this piping. To do this better, it is better to check the places where the pipe is going to pass through to make sure that the damage to the pipes is minimal; For example, in places where there is a possibility of pipe corrosion, the pipe should not pass. You should also pay attention to the fact that the sewer pipe is slightly lower than the water pipe; Because if the sewer pipe is higher, the possibility of mixing at the time of pipe leakage is very high.
The water pressure of the appropriate pipe
The next thing that is very important is what should be the water pressure of the pipe? The tap water should be pressured enough to meet the needs of the household. Of course, it should be noted that pumps are also used to compensate for the decrease in water pressure in high-rise residential buildings.
Tube corrosion rate
Among other important points, we can mention the saying that the tube should not be eaten. Due to the fact that iron pipes were used a lot in the past; Corrosion was more common in them, and if it was not resolved, it would lead to more problems such as the roof falling. If today, polymer pipes are used, which are corroded later than other pipes and are also standard.
Piping of water and sewage
The way of piping water and sewage differs according to the type and model of the pipe. In the following, we will examine three models of special common plumbing, PVC, cast iron, cement and galvanized pipes, so stay with us.
PVC pipe piping
PVC, or polyvinyl chloride, is one of the polymers that is considered one of the valuable products of the petrochemical industry. PVC is widely used in the construction industry due to its convenient operation and reasonable price, and it has replaced many old devices. PVC pipe is considered the most popular model of polymer pipes. It has good resistance and its lifespan is high. Due to its resistance, PVC pipes are used in most buildings. To install PVC pipes, it is very convenient to connect them using glue. PVC pipe becomes flexible in front of heat, and this has caused its efficiency to increase several times.