Select the type of reconstruction and its extent
In the first step, the type of reconstruction and its amount should be specified. Reconstruction is usually done in two general and partial ways. In general renovation, all parts of the house such as flooring, wall covering, heating and cooling facilities, plumbing, wiring, etc. are restored and renovated. But in partial reconstruction, only a part of these things is done. Generally, total renovation is considered for buildings that have been built for a long time. For this reason, it is better to determine the type and amount of reconstruction at first and proceed to the next stages of reconstruction based on that. It should be noted that the type and amount of renovation has an effect on the cost of building renovation.
The selection of the contractor and the reconstruction team
One of the most important stages of home renovation is finding an expert and experienced contractor. Choosing an experienced contractor will make the stages of the renovation project go more easily and achieve a favorable result. The best contractor and the renovation team perform all the necessary measures according to the client's budget. Also, the presence of an expert contractor from the very beginning of the project will prevent rework and save a lot of money and time.
3D project design
At this stage, the employer's ideas and needs are implemented and all the details of the work are specified. 3D design gives an overview of the final result. If the employer is not satisfied with the design, he can make the desired changes in it. Changing the map is much easier than changing the work done in the renovation project. For this reason, the plan should be finalized first and then the reconstruction should be started.
Get the necessary permissions
Depending on the type of renovation, different permits are required. If the renovation is minor and there is no need to move walls, blades and change sections, there is no need to get a permit. However, for matters that cause fundamental changes and disrupt the building plan, the necessary permits must be obtained from the municipality. Regarding the cases that require a reconstruction permit, it is possible to mention the destruction or relocation of walls, the destruction or relocation of storage walls, the relocation of building stairs, and the relocation of parts that cause a conflict with urban development regulations.
Destruction
One of the most important stages of reconstruction is destruction. If it is necessary to completely remove one or more parts, they must be destroyed in compliance with safety principles. If there is a need to change the water, electricity and gas system, parts of the building must be demolished for this purpose. Demolition is a very sensitive work and should be done by experts. During the demolition, the water, electricity and gas of the building should be cut off to reduce the possibility of unexpected risks.
Prioritization of sections and reconstruction order
At this stage, all actions and activities that are considered in the reconstruction should be specified and their order should be determined. For example, if a wall is to be demolished, it should be demolished in the early stages. Also, changing the flooring, replacing pipes and facilities should be done in the initial stages. After finishing these works, you can move on to things like changing the wall covering, installing cabinets, painting, etc.
Start reconstruction
After the demolition and determining the order of reconstruction, you can start the process of building restoration and reconstruction. At this stage, according to the initial plan and plans, restoration and reconstruction operations begin. Regarding the actions that are usually carried out in most renovation projects, it should be mentioned the installation of new doors and windows, installation of cabinets, installation of faucets, installation of new flooring and wall coverings, insulation of bathrooms, water piping, electricity, gas, plastering and painting. /p>
