The handles are usually connected to the outer part of the cabinet, drawer and closet with one or two screws or more, so their beauty and style have a great impact. The single screw handle usually looks more beautiful than other handles, but their installation requires more expertise. Based on the shape, the cabinet handle can be divided into round and oval, mushroom and square, square and rectangular, octagonal, arched. It was divided into dar, ring, rod, etc. The selection of each of these shapes should be done based on the decoration and theme of your kitchen and cabinets, but in general, it can be said that round handles are used for traditional kitchens and bar handles are usually used for modern kitchens.
Of course, in minimal kitchens, cabinets are sometimes made without handles, and it is possible to open the cabinet either with a touch mechanism or by pulling a part of the drawer door.
Cabinet Frame - Cabinet hinge
A cabinet hinge can be considered a cabinet joint, a mechanical part that connects the door to the cabinet body and causes it to move. This cabinet hardware is divided into two categories: simple hinge and gas hinge. A simple hinge is metal and has no special features, and in the long run it suffers damage and rust, and it is usually not used for making cabinets today (especially non-metallic cabinets).
Gazor hinge is a cabinet hinge made of steel, and the most important Its feature, apart from being springy and soft, is the ability to adjust and adjust, which makes the work very convenient for the installer and the user, and even the customer can adjust it without the presence of his technician. It is a small space in the body of the cabinet where the hinge sits inside and does not occupy extra space. The device that creates this space is called Gazor Zan.
Gasor hinges have different types depending on the place of use and application:
For example, the gasor hinge with the help of a soft pump jack provides the conditions that at any speed you release the cabinet door, the speed will increase to The face automatically adjusts and the door closes gently. Basically, the pump hinge plays an important role in all kinds of cabinet fittings. Another type of hinge is the gasor glass hinge, which is used to install hinges on glass doors, and their important feature is that they do not need to drill holes in the glass. >
Simple gasur hinge and hidden gasur hinge are other types of gasur cabinet hinges.
Cabinet fit - jack cabinet
Cabinet jack, an example of which was mentioned in the previous section, the soft pump jack, is an important part of the cabinet fittings and should be paid special attention to when buying cabinet fittings.
The best material Cabinet jacks are stainless steel and are divided into different types such as pump or gas jacks, bus jacks, and arm jacks.
Pump or gas jacks or soft-band pump jacks according to the force that can be tolerated for doors of different sizes and weights. Different ones should be chosen in such a way that according to the weight of the door, you should use the appropriate cabinet jack; If the power of the jack is low, it closes with a sound and impact when closing, and if the power of the jack is high in proportion to the weight of the cabinet door, a lot of pressure is applied to the hinge when it is opened, and the door opens with great force.
Bus jack or An elevator opens from the top like a bus cabin door and has a safer opening mechanism so that the door does not hit people's heads. This type of jack is usually used for gutter doors and wall cabinets.
Cabinet Frame - Rail Drawer
There are different types of cabinet and drawer rails as in the previous cases. One of the most basic and common types of cabinet rails is the roller drawer rail. These rails were used in the past when most of the cabinets were metal. Roller rails do not bear much weight, but they have relatively high resistance to weather and temperature. Another example is a simple ball drawer rail that Due to the presence of balls in the body of the rail with the aim of moving the drawer more smoothly, it is called a ball rail and therefore it can bear heavier weight.
A ball rail, which is also known as a telescopic rail, is one of the best types of cabinet rails. It is considered and it is presented in two models, 2 pieces and 3 pieces, where three pieces are used for drawers with greater depth. Ball rail, in turn, has different types, one of the most common and common Its types are ball rail with brake or slow stop.
Another type of drawer rail used in cabinet making is tandem rail or hidden rail. The tandem rail mechanism, which is one of the best types of cabinet and drawer rails, works with a set of gears, unlike the ball rail and the use of rails and balls.
And finally, the best type of drawer rail, magic box rail or body rail, is the ultimate in technology and attractiveness in making drawer and cabinet rails, and is perhaps the best cabinet rail. This type of rail has all the advantages of drawer rails. As its name suggests, in addition to the rail and related fittings, the body rail has a metal or glass body or bracket inside which the drawer is placed, and in addition to reducing the size and width of the drawer, it also increases its weight resistance. It makes much more.
Cabinet's fittings - cabinet accessory
We have reached the interesting part of introducing all kinds of cabinet fittings, i.e. cabinet accessories. Yes, that's right, the cabinet accessory is a part that gives a special charm and beauty to the kitchen cabinet, and by choosing the right accessory in the kitchen, you can give a special order to the layout and decoration of your kitchen. It is possible to refer to all kinds of cabinet baskets, super cabinets, all kinds of watering cans and containers, cabinet hangers, wooden or metal forks and spoon holders, and cabinet trash cans.
