What should we consider when choosing an isogam?
When buying isogam, there are points that determine the quality of isogam, if you intend to buy high-quality isogam, be sure to pay attention to these points:
1- Isogam must have a standard mark.
2- Isogam should be purchased through reliable sources and agents.
3- The weight and thickness of isogam should be standard and according to its information.
4- The purchased isogam should not have an unpleasant smell and with touch by hand will give color.
All these points along with the after-sales service, will lead to the purchase of high-quality isogam that will properly meet the needs of your structure.
The first point in the appearance of the isogam is the insertion of the standard mark on the product, a high-quality isogam has a standard mark and certain specifications that are recorded on it, the process of registering the standard mark indicates the conduct of heat stability tests, checking the resistance of flexibility It is suitable, impervious to water and other important things that will be required to meet your needs.
The length, width and thickness of the isogam is a certain amount, each isogam roll is one meter wide and ten meters long. is, the average thickness of isogam is about 4 mm. One of the other quality criteria of Izogam is its weight, which is on average about 2 kg per square meter, it should be noted that more weight does not mean a higher quality of Izogam.
Izogam labels It should include the manufacturer's specifications, type of insulation, production date and standard mark. .
In general, there are many low-quality and counterfeit isogams in the market, so pay close attention to the points we talked about when buying isogam.
We discussed the quality criteria and important points about Izogam, and now we are quoting the important points of buying Izogam from Alborz Arghvan team. Make sure in the product.
Low-quality isogams often have an unpleasant smell, which is caused by the low quality of the fibers used in it. it will be transferred to you, if high-quality materials and polymers are used in the production of isogam, this will not happen. After two hours, try to bend it, if the isogam is broken, it is not of the required quality, and that isogam is of poor quality.
Make sure that the isogam must be properly packaged, vacuumed with a label. .
