Angled sections
These sections are divided into two categories: angled sections with equal angles and bases with equal dimensions, angled sections with unequal angles and bases with different dimensions. Angled sections are used in the construction of roof trusses. Angles and studs are among the angular sections.
Angle: Angle looks like an English L. And its cross-section is placed in the form of two perpendicular sides, and it is responsible for connecting two metal parts to each other. Corners are produced by two methods, hot rolling and cold rolling, and in order to connect the bridge to the column, the beam to the load-bearing beams, to make the column. , making trusses, making different types of frames, different column bases, stairs, masts, making lids and light roofs, making gables, etc. It is used singly or in combination. Gutter: The gutter looks like the English letter U, and the cross-section of the gutter consists of one body horizontally and two wings vertically. According to the steel sheet used, the studs are also divided into 2 categories: mesh and simple. From simple studs in the construction of walls for warehouses, workshops, construction of light roofs, as beams, construction of door and window frames, construction of vehicle frames, construction of walls and The roof of the trailer, the construction of fences, bridge trusses or protective rails, in the construction of marine equipment and mesh studs are also used in the construction of steel shelves and steel-style structures.
Canal -shaped sections
These sections are produced in the form of circular steel pipes and square and rectangular sections in different dimensions and sizes and they are used in the construction of columns, beams and trusses.
T -shaped sections
In T-shaped sections or shields, wings and webs are "T" shaped and they are used in the construction of trusses to strengthen the structure, in roofs, skylights, guardrails, dam construction, door and window construction. These sections are produced in sizes from 20x20x3 mm to 150x150x10 mm and in different thicknesses.
I -shaped sections
I-shaped sections, which are called metal beams or beams; It is produced in different sizes from 75 x 50 mm to 600 x 210 mm and is used as a beam or column in the building. There are two parallel wings at the two ends of the beam, and there is an iron part between the two vertical wings, which is called the beam. These two parts of the beam bear the forces on the building.
Rebar
Rebars or reinforcements are one of the most used construction sections, which are made in circular sections with a diameter of 5 to 250 mm. These sections are used as reinforcement in concrete structures and metal furnaces.
Flat sections
Flat sections are also used in the construction of doors and windows. These sections are produced with a width of 10 to 400 mm and a thickness of 3 mm to 40 mm.
Page sections
page sections; It is made of light metal sheets that are cut and smoothed with the help of a machine. Generally, in these sections, a rhombus-shaped network of sheets is made.
Wire products
Wire products have a wide range and include types of press netting, fence netting, fringe netting, gabion netting, types of black and galvanized wire, fence beams, mesh, rabits, etc. These products are used in industrial and building constructions. For example, black wires are used when closing the reinforcements and building the foundation.